User Rank
Excellent post and hydraulic pumps
paddlej   1/9/2012 10:53:59 AM
Excellent post. I want to further support the importance of properly sizing the hydraulic pump for the machine. An inproperly sized pumped, as most of you know, can cause all sorts of expensive problems.

William K.
User Rank
Are hydraulics the way to improve?
William K.   10/14/2011 10:58:12 PM
HYdraulics may be more efficient than some gearboxes, but in many cases the better efficiency would come from being 100% electric everything. What hydraulics can do very well is put the most energy in  a small place, and a cylinder will live well even if you stall it So there is a time and place where hydraulic power is the best choice, but it is not everywhere. Most time changing to hydraulics is not done for efficiency.

User Rank
Re: Excellent write up of Hydraulics
SparkyWatt   10/13/2011 10:34:32 AM
Let's be clear here.  This article argues that hydraulics are more efficient than GEARBOXES, not electric motors.  Most hydraulics are powered by electric motors in the first place, and I am quite sure that a high efficiency direct drive brushless motor is more efficient than the induction motors usually used for hydraulics.  However, if you have a gearbox in the drive train, you often lose 40% to the gearbox, and his points about bulk and weight are still well taken in certain applications.  However, it is important that we think clearly about where the inefficiencies are or we will solve the wrong problem.

Jack Rupert, PE
User Rank
Re: Excellent write up of Hydraulics
Jack Rupert, PE   10/12/2011 1:37:13 PM
Yes, excellent write up.  Sometimes going back to the simpler designs produces a great improvement.  The one issue, though, is that hose breaking is a bit more problematic than a wire.

Ivan Kirkpatrick
User Rank
Excellent write up of Hydraulics
Ivan Kirkpatrick   10/12/2011 12:57:14 PM
Good posting on this subject.  I appreciate the comparison to electric systems and the benefits to be gained by applying hydraulics.  I have long suspected that the trend to shift as much as possible to electric positioning systems and such might not always be the best approach.

Partner Zone
Latest Analysis
We celebrate Halloween with a look at 13 of the scariest technology-based horror movies of all time, as well as some real-life technologies that bare a frightening resemblance to what's on screen.
When Charlie Miller and Chris Valasek made headlines by hacking and crashing a Jeep last year, the event followed many months of study and trials.
A unique set of multi-network servo drives introduced by Mitsubishi Electric enables the company’s servo motion capabilities to be integrated into EtherNet/IP, EtherCAT, or PROFINET networks.
With a better understanding of materials’ response to load and temperature, researchers could potentially use the knowledge to improve design. The research could even help geologists studying plate tectonics.
A panel on cybersecurity at ARM TechCon called for regulations to protect the security of connected devices.
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Oct 10 - 14, Embedded System Design Techniques™: Getting Started Developing Professional Embedded Software
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7 | 8 | 9 | 10

Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Course November 8 - 10:
Sponsored by 3M
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Technology Marketplace

Copyright © 2016 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service