@Michael - You're right, of course, that where PLM is properly implemented there tends to be a big benefit. However, it is generally the larger companies that can devote the resources necessary to implement it. Unfortunately, its the small to mid-sized places that are having a hard time justifying the time and expense.
I have to disagree with the premise of this article that we are not seeing value from PLM. I have many, many examples from a wide variety of organizations of substantial value from PLM in both engineering and manufacturing. I have done a number of case studies going back to 2003 that feature organizations obtaining real value from PLM. More recently, in my work with NASA, I have a number of examples of multimillion dollar savings from manufacturing simulations.
A few years back, Purdue did a survey of PLM users. One of the questions asked was the level of return on investment from PLM projects. Most respondents checked the "greater than 35%" response, which was the highest option.
While I would agree that organizations need to change processes, practices, and even culture in order to get the maximum benefit from PLM, the reality is that I have yet to run across an organization that didn't get benefit from PLM, even if they simply used it as a tool. That may not have gotten the benefit that they could of, but they got enough benefit to justify investment.
If you have examples of organizations that brought PLM in, it failed to give them value, and they abandoned it, I'd like to hear about it.
We are inthe middle of implementing a high-end PLM software system. My assessment so far is that we would have been much better off by just working on our PLM processes (within the in-house, ad-hoc framework) without buying very expensive software and tying ourselves to the very unfriendly and rather inflexible software platform.
I had high hopes for the SOA/SaaS movement in recent years - another pretty high ramp-up cycle. Another great concept, but tough to tell if this was a lot of vapor, or something real. You mention verticalized applications. I think that's the key, and architecture is EVERYTHING. SOS/SaaS software infrastructures can provide great architectures upon which one could build a suite of highly customized PLM applications, WITHOUT incurring the huge "one off" implementation cost of an SAP or "traditional" PLM implementation. It could be much like the Droid platform provided for developers in consumer mobile device software, but instead packaged for corpoate use in their own unique product lifecycle. Trouble is, after much early hype, and many vendors claiming they "do it", I don't yet see any evidence of anyone using it and certainly not benefitting from it. One could suppose that means apps are still in the works, or, hmm... maybe it was vapor.
I've been covering PLM since 1999 and I have to agree it's only been in the last couple of years when you've really started to hear more tangible examples of how companies are gaining efficiencies and driving innovation in product development through the use of PLM practices and software.
I think part of the slow ramp is that the initial wave of software was pretty un-user friendly and expensive. Just like with any new enterprise platform, the amount of dollars poured into consulting engagements just trying to get the platform tuned to the way an organization worked sent the price tag of early PLM implementations skyrocketing.
Today, however, you see more out-of-the-box packaged tools, many custom tailored for workflows and business processes fitting particular vertical industries, which helps time to value. The software is less toolkit-like and more like what people are used to and there has been tons of effort by vendors to flesh out these suites with additional modules (think supplier management, requirements management, service and support) so they are not glorified Product Data Management (PDM) platforms tuned only to the needs of managing CAD files.
All in all, good stuff, but I think way more value to come!
I agree with you, David. Just like a new operating system or a drastically new machine interface, the learning curve can be very steep and time consuming before the benefits of the upgrade are realized. I've been teaching Systems Dynamics to undegraduates and it takes a while for them to "get it" --- and that is without first having to erase any misconceptions or poor practices developed out of a Mechanical Management view. On the optimistic side, I'd say 10 years is pretty quick. =]
For 3D printing to make the jump from rapid prototyping to manufacturing, engineers will need to find easier ways to move products from their CAD screens to their printers.
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
