The fact is that my assertion was that a primary way to be secure was to not have the capability present, not wired of fiber or wireless. Tha capability of remotely changing the program would not be present in the system. No, there is no question about it being less convenient, but a disaster is more inconvenient. But if the way to change a calibration or a program requires physicaly operating a switch at the machine, then all remote hackers are kept out.
Thanks Ivan, Chuck, William for great points. William, the ideal case you raised of a physical control over the hardware network might be re-interpreted by others to say a hard-wired physical-layer network, preferably fiber, should be used for changes in configuration. Yet someone will always come in and demand wireless updates for reasons of cost, and all the best ideas for trusted systems fly out the window. This TCG work will be interesting to watch.
The way to protect factory and any other important machine control networks is to not allow the capability of external modification to exist at all. Of course it is more convenient and cheaper to change the program and the parameters over the network. It is also not possible to have this ability and have it be secure, we all know that. But real security does have a real cost, which is that somebody would need to actually visit the controller and alter the program or settings. Any outside access is not completely secure, only fairly secure, and we all know that any security measures only last untill somebody cracks them. And that always happens.
So it becomes a trade-off of costs-which costs more, manual updates or hackers damage? Each can be calculated, and then a decision can be made.
I agree, Ivan. This underscores the importance of recent "safety microcontroller" rollouts by TI, Freescale, and Renesas. The Embedded Systems Working Group is one more sign that we are collectively paying attention to vulnerabilities of power plants, air traffic control systems, financial systems and, yes, train yards.
The truth of the matter is that the US is extremely vulnerable on so many fronts in this cyber war. We have so much of our infrastructure that is accessible through the various networks. air traffic control and electrical generation and distribution systems are all vulnerable. In fact it is a good bet they are already penetrated and sleeper code is in place to do harm when the controlling organization or country wants to initiate an attack. I venture it is a safe bet that the US is the most vulnerable of any country.
Another long overdue consideration is that defense in cyberspace is far behind offensive capabilities. Countries like North Korea are not as susceptible to cyber attack as we are. They just don't have that much infrastructure to protect.
It will take a great deal of attention and money to bring this situation under control. Embedded chips made in other countries may not be safe from malicious code being designed into the system fromt he beginning. Detecting this and preventing it use will require additional efforts that might not be possible with the existing systems.
We looked at a number of sources to determine this year's greenest cars, from KBB to automotive trade magazines to environmental organizations. These 14 cars emerged as being great at either stretching fuel or reducing carbon footprint.
Researchers at MIT and Sandia National Labs have observed a reaction in lithium-air batteries that could help improve the design of these cells for electric vehicles and other applications.
Healthcare might seem to be an unlikely target application for the Internet of Things technology, but recent developments show small ways that big-data is going to make an impact on patient care moving into the future.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
3 
