While I'm no dummy to think people aren't going to email/text/surf while at the wheel (I'm guilty as well) and I applaud standards that make it easier to connect, the trend of serving up more technology while driving scares me. Even with headsets, built-in consoles, etc., it's totally distracting to figure out what buttons to press or how to activate the voice commands. It's a technology trend that's likely unstoppable, but that doesn't mean it's good for driver/passenger safety.
I recently purchased a 2011 Corolla and didn't expect this commuter car to have as much tech as it does. The head unit connects via bluetooth to my not-very-smart texting phone for both voice activated calls and music files. The USB port works seamlessly with my son's iPOD and also with my Android tablet.
Depending on the day, my 45-min one-way commute can devolve into a 2-hour marathon. Having these communication options along with Satalite radio helps immensely. I'm delighted design engineers have recognized that in addition to style, performance, and mpg, driver and passenger entertainment is a very important component.
For this very reason, the consortium should develop the new standards leaning toward large-font, single-instruction, audio-augmented, screen-based, naturally-intuitive user interfaces. Take lessons from jet-fighter cockpits, and be able to make selections with a nano-second glance.More Human Factors considerations for dummies like me who clumsily STILL can’t find the ¼’ black button I’m looking for to change the mode setting. Although my wife can skillfully put on make-up, talk on the phone, and have sandwich while cruising the interstate, I still mis-pick my intentions when offered too many alternatives in a tightly arrayed button layout. (…why texting causing fatalities…)
I think that Beth is more correct, in that what we really do not need is more driver distractions. Multiple times every day I see folks driving while paying a lot of attention to their phone call. Safe driving requires a great deal more attention than they are giving it. The sad reality is that cell-phone driving is distracted driving. It has very little to do with the physical handling of the phone, and a whole lot to do with having a full duplex conversation going on. The only way to make cell phones even close to safe in a car will be to change them to simplex, that is, "push-to-talk" operation.That mode is much less distracting.
Actually, going to simplex might make people a lot more polite after a while.
I agree William. In my city (Albuquerque) we have a law restricting cell phone use except for hands-free phones. But the conversation is the problem, not the hand holding the phone. If it were the hand, they'd outlaw the coffeee I drink while driving.
One thing I find interesting is how a cell phone conversation is can so distracting while a conversation with your passanger is not distracting.
Evidently the second part of my previois comment did not have much impact. That was the part about making the phones SIMPLEX. What simplex means is that only one party can talk at a time. This is how most commercial two-way radios have functioned for over fifty years, and how amateur and citizens band (CB) radios have always worked. The huge difference is that while one is talking they can not hear, and while they are listening they can not talk. The result is that much less attention is required. Of course, it also has a tendancy to make folks more polite, because interrupting while the other is talking is simply not possible.
So changing automotive cell phone conversations to simplex is my suggestion for making cell phones safer. Of course, it could greatly extend battery life, which would be a handy tradeoff, in exchange for being able to interrupt constantly. Actually, the only hardware change would be to add the talk button to existing cell phones, the rest could be a simple software change. And the beauty is that when one was not driving the old duplex mode could still be used. So mostly it would just be a hardware change, and a cheap one at that. Probably less than 20 cents. The big change would be in the code running the phone, which would need to be revised. Actually, the really major change would have to be in the users, learning to stay quiet and listen, instead of constantly interrupting the other person. That change in style would probably benefit most of us.
By refining topologies and using new fluid technology, Moog's new peak sine drive controller increases available power without increasing controller volume.
Lantronix Inc. has expanded its line of controllers for sensor networks with the release of a rugged controller that improves management of automation systems used in a number of industries, including manufacturing, oil and gas, and chemicals.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
6 
