HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
<<  <  Page 5/5
SCUDERI
User Rank
Iron
Shaking the Automotive Industry.
SCUDERI   9/25/2011 4:41:26 PM
NO RATINGS
Hello to all.  Scuderiengine.com  answers many of your questions.  THIS  innovative engine technology will definitely shange the engine world (ICE) forever.  Lets NOT be "Car-Centric" here.   There are ICE  Internal Combustion Engines in many other applications and not only the automobile.  Lawnmowers, tractors, big generators, boat engines (large + small) basicly ANY  ICE with piston technology.  As a former Rubber+ Plastics engineer and a youthful "Motor-head",,,,  I knew this project was a winner within 30 minutes of a complete inspection of their technologies and developments...

Go to the web-site.   This concept  "ATDC" is not only central but its been their focus for many years; at Team Scudei.    I immediately invested upon being offered the opportunity to get on board with this  "Gamechanger" ..

In my opinion....look at the progress and then the depth and gameplan that Scuderi  employs.  They are asked...they answer beyond expectations and then they engineer beyond expectations.   Right now...at 65 mpg proven via simulation,,,there is talk in the 80 mpg range and a longer view of 100 mpg.  Will they breach these barriers?  I do not know; but they have repeatedly pushed foward beyond their expectations many times before.

Right now....I await the announcement of our 1st leassee of the technology and I am preparing for the push to "Go Public "  as Sal Scuderi has stated may times in the past; as the GOAL of Scuderi Motors.    The time has come for a real world demonstration.  The significant strides foward can no-longer be kept in the closet.  It's time to show the public and get ready for the stampede !!!!

GO SCUDERI !!!

                                                                                              Clifford White  :))

 

 

TJ McDermott
User Rank
Blogger
Re: Very Likely
TJ McDermott   9/24/2011 8:28:51 PM
NO RATINGS
This is likely to be what gets the automakers to the 54 mpg 2025 limit.  If automakers are foreward thinking enough, they can trumpet they got there 10 years early, too.

Still, this takes away from the goal of weaning off fossil fuels.  The innovation that DOES make a storage battery approach the power density of liquid fuels is what is needed.

William K.
User Rank
Platinum
Split cycle engine= two stroke?
William K.   9/23/2011 10:13:52 PM
NO RATINGS
This sounds a lot like our two stroke engine, except for being more complicated and having six valves. Clearly it allows much more variation in timing of all the several parameters like when to start the air intake  portion and when to inject the fuel. Depending on the timing requirements, the same functions could possibly be delivered by a standard two-stroke engine, even better if it had direct fuel injection. Such an engine might possibly also fare better in emissions testing, although efficiency and low emissions seldom peak at the same time. But as the split stroke is compared to a two stroke, it is clear that they are similar.

Beth Stackpole
User Rank
Blogger
Re: Very Likely
Beth Stackpole   9/23/2011 12:14:11 PM
NO RATINGS
Seems to me that any kind of technology that has the potential to advance the cause of fuel efficiency is to be taken seriously. Glad to hear that analyst groups and automotive OEMs have this on their radar screens even if it's some time out before we see the actual technology in production vehicles.

Ivan Kirkpatrick
User Rank
Platinum
Very Likely
Ivan Kirkpatrick   9/23/2011 11:25:07 AM
NO RATINGS
I think this is going to be a good technology to watch.  With the government mandating higher fuel efficiencies and "good enough" battery technology still a few years away, this might be the technology that gets us there.

Proving this works in high output engines will be an important factor.  It does have some interesting characteristics, for one, the hot side of the engine stays hot and the cool side does not heat up too much.  This is in contrast to the Otto cycle characteristics.  

I would be very curious as to just why the retardation of the spark helps so much in this design compared to the Otto cycle.  And another obvious question to me is if the split cycle is amenable to creating a split Diesel cycle?  Would there be any benefits in that?

<<  <  Page 5/5


Partner Zone
Latest Analysis
Advertised as the "Most Powerful Tablet Under $100," the Kindle Fire HD 6 was too tempting for the team at iFixit to pass up. Join us to find out if inexpensive means cheap, irreparable, or just down right economical. It's teardown time!
The first photos made with a 3D-printed telescope are here and they're not as fuzzy as you might expect. A team from the University of Sheffield beat NASA to the goal. The photos of the Moon were made with a reflecting telescope that cost the research team 100 to make (about $161 US).
At Medical Design & Manufacturing Midwest, Joe Wascow told Design News how Optimal Design prototyped a machine that captures the wing-beat of a duck.
The increased adoption of wireless technology for mission-critical applications has revved up the global market for dynamic electronic general purpose (GP) test equipment. As the link between cloud networks and devices -- smartphones, tablets, and notebooks -- results in more complex devices under test, the demand for radio frequency test equipment is starting to intensify.
Much of the research on lithium-ion batteries is focused on how to make the batteries charge more quickly and last longer than they currently do, work that would significantly improve the experience of mobile device users, as well EV and hybrid car drivers. Researchers in Singapore have come up with what seems like the best solution so far -- a battery that can recharge itself in mere minutes and has a potential lifespan of 20 years.
More:Blogs|News
Design News Webinar Series
10/7/2014 8:00 a.m. California / 11:00 a.m. New York
9/25/2014 11:00 a.m. California / 2:00 p.m. New York
9/10/2014 11:00 a.m. California / 2:00 p.m. New York
7/23/2014 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Oct 20 - 24, How to Design & Build an Embedded Web Server: An Embedded TCP/IP Tutorial
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: 10/28-10/30 11:00 AM
Sponsored by Stratasys
Next Class: 10/28-10/30 2:00 PM
Sponsored by Gates Corporation
Next Class: 11/11-11/13 2:00 PM
Sponsored by Littelfuse
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service