I can't totally fault them for using old equipment, as long as it was working well. In the physical/dimensional arena, there are many areas where the advances in engineering have not greatly improved measurement accuracy.
For example, modern electronic theodolites are no more accurate in terms of angular measurements than manual instruments that are older than I am, and I can retire in a few years. The modern instruments have additional features, are easier to read and operate, but are no more accurate than some theodolites built in 1950. This ease of use comes at a price. The old manual instruments had to be made carefully, and got their accuracy by the manufacturers making the instrument misalignments as small as possible. Modern instruments measure the misalignments and compensate for them in software. This works great, as long as the instrument was setup properly. Otherwise, it will cheefully lie to you with a straight face.
Mechanically and optically, those old theodolites are often better than the new ones. That is, and this is the kicker, assuming they have been carefully used and maintained for all those years.
- Company's knowledge base in it's employees (a very hard to quantify item)
- Standards (and equipment in general) being used in a organization.
I thought the Rob did a good job of making the distinction. Jason and Tim made some very good points on the subject. Properly maintained older equipment in knowledgeable hands often performs as well (sometimes much better than) the latest / greatest equipment available.
The wisdom to know which issue you are dealing with ... priceless.
sorta like: defining the most cost effective duration to own a car. It depends.
Good distinction, Jason. And you bring up an important issue I keep hearing about--that is the knowledge transfer of critical IP, especially when a firm has not fully embraced systems and processes to capture all of their design intellectual property. Whether that IP sits in some engineer's head regarding test practices or design best practices, it's crucial organizations formalize a way to hang on to all those IP assets especially as we see a generation of engineers retiring from the work force.
Beth: I agree with you for 80% of the cases out there concerning aging equipment. However the other 20% I will have to disagree.
One of the problems will show itself when you have custom application or device that was designed by the current Guru who then, 5 years later, retires and never really taught anyone some of their tricks. This tends to leave a company/group with a piece of equipment that was built in house that still does not have a modern counterpart because it was never designed for the outside world.
We have several issue like this at work where it is taking longer to try and recreate a test solution than if we had just continued using the solution that was made 5 or 10 years ago.
With so many advances having been made on nearly every level in engineering, manufacturing, and testing, I find it scary that a 40-plus year piece of equipment still plays such a major role in development. Semi-proficient or not, it's time to get with the program and embrace the modern world.
Engineers at Fuel Cell Energy have found a way to take advantage of a side reaction, unique to their carbonate fuel cell that has nothing to do with energy production, as a potential, cost-effective solution to capturing carbon from fossil fuel power plants.
To get to a trillion sensors in the IoT that we all look forward to, there are many challenges to commercialization that still remain, including interoperability, the lack of standards, and the issue of security, to name a few.
This is part one of an article discussing the University of Washington’s nationally ranked FSAE electric car (eCar) and combustible car (cCar). Stay tuned for part two, tomorrow, which will discuss the four unique PCBs used in both the eCar and cCars.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.