I am curious why the rankings don't take into account any of this shift into account. If some schools are moving to more hands on and this is desireable then shouldn't the rankings reflect this. Of course, that would imply that the rankings have some sort of meaning. Nothing against MIT or any of the other fine schools on the list. But quite often the best school is the one that allows the individual to thrive, grow and learn. And for some that might not be the biggest with the best name, but a smaller school with more one on one instruction. Non the less, it does make for good coffee table talk.
We have very similar backgrounds; I came to MIT as a freshman in 1961 (just missed Pease!), licensed as a ham in 1957, electronics hobbyist since 1954. I do have a somewhat different perspective. I had a full tuition scholarship that covered the $1500 annual; in the spring of 1962 they announced an increase to $1700 that resulted in a huge (fruitless) protest by students. My parents covered the basic room & board. I worked multiple on-campus jobs to pay for books and everything else. Since I had a good "hands-on" background and shop/soldering skills, most of my on-campus work (and some of my coursework as well) was also "hands-on." Despite MIT's reputation, at that time there was plenty of opportunity for getting your hands dirty! I learned how to design and wind toroid transformers as part of working on a student project (run by Prof. Bose) designing and building our own transistorized oscilloscopes (in 1962! I still have the basic guts of mine). I spent so much time having fun with my hands-on stuff that by the middle of my sophomore year I was in deep trouble grade-wise! Lost my scholarship (retroactive!), barely made it through the rest of that year financially and grade-wise, and transferred to Newark (NJ) College of Engineering (now part of NJIT). NCE was even more hands-on; most of the faculty were actively consulting with local industries (compared to MIT where it was mostly government-funded/defense work on-campus). I thrived in that environment, got my scholarship back (National Merit), went on to grad school, etc. I'm still actively working in engineering 50 years after arriving at MIT, and having fun doing it!
I do agree that certainly the best engineers often started their "hands-on" training well before college; however, at least one of my honor-student colleagues at NCE went into EE just because he thought it would be a way to earn a good living (his dad was a lawyer, which made that route less desirable!). He turned out to have a long successful career as an EE, including a couple of entreprenurial ventures. The biggest problem in engineering education I've seen over the years is the continuing tendency to neglect the core fundamentals (like thermodynamics solid-state physics, etc.) in favor of the fad du jour (remember ADA?). You need those fundamentals to begin to understand reality; without them, you're left scratching your head when your designs simulate perfectly but fail in the real world.
The problem is that "best" can mean so many different things. As others have mentioned, value is one. But in addition, there are other variables. Do you want to be a PhD? Do you want to work in Service? How good is their placement? What is the technical forte of one school vs. another? How much assistance is there for employment after 20 years? Do you want to focus on a particular geographical region? Everybody has different priorities and sometimes these "best" lists don't tell you all that much.
To Bobalewy: Your comment regarding bang for the buck is right on the mark. As someone who has put two children through college and is currently putting two more through, I can say that the pricetag matters a lot. Surprisingly, some of the best colleges are quite affordable...IF they give you a big discount (based on your financial need). Stanford, for example, claims its average costs after receiving grants is $16,612. MIT says (again, based on cost after grants) is $17,944. Cal Tech is $21,359. These are all averages, based on financial aid received. My question is: How many people really receive these discounts?
I agree that value is also a consideration. School selection was based on the best school that I could afford. This process put me at Penn State which gave me a great education and a diploma with a recognizable name. MIT would probably look better, but it just wasn't affordable to me and my family.
I must agree with Bobalewy that value MUST be a consideration. I did go to MIT in 1957 & it is a fine institution. But it is very compeditive and VERY expensive. For me it was also a long way from home. Cost was prohibitive so I transered to Tulane University in New Orleans. The EE program then was quite good. Neither MIT or Tulane had co-op programs which I support. I got MY hands-on at a hi-fi shop in San Antonio. I got my ham license (K5CSJ) in 1954 & FCC Broadcast Licenses in 1956. I worked 4 summers as a brodcast engineer at a radio station (KTSA), and two TV stations (KENS & WWL). Great experience & I was paid well- far above what an average teen would expect. At Tulane I worked at the Physics Dept. as a lab assistant. Lab director was ex-Texas Instruments engineer who was starting a new company. He taught me all about transistors. (The school then used ancient models to teach that - I frustrated them when I got the right answer when using different methods - and in one case building a model to prove my point.) At Tulane I also founded the campus radio station, WTUL, now a full-time FM station. I was one of 4 who founded TANO Corp. in New Orleans and we did very well.
BOBALEWY, I agree and also with another responder who recommeded 'hands-on' experience. I am retired now & ex-wife is rich, but I consider myself an 'analog engineer' and a fan of the recently-late Bob Pease. (Pease & I were in the same MIT class, but I did not know him then). In 1956, as I look back, I should have taken the all-inclusive Navy ROTC Scholarship to Rice University in Houston. And then an MBA, 4 years or less in Navy, and then checked out opportunity in the 1965 market.
A good test for quality of engineering education would be whether graduates understand the Second Law of Thermodynamics. That fundamental law of physics separates out the physics fools that seem to be abundant.
The test would require understanding of the difference between 33.7 kWhr of heat that can be obtained from a gallon of gasoline, or any other equivalent fossil fuel, and 33.7 kWhr of electricity.
Can you get 33.7 kWhr of heat from 33.7 kWhr of electricity? Answer: Yes!
Can you get 33.7 kWhr of electricity from 33.7 kWhr of electricity from 33.7 kWhr of heat? Answer: Nowhere close. Typically more like 10 to 15 kWhr of electricity is all you can hope for, much of the loss due to the Kelvin and Carnot explained Second Law.
We know there is not much real science around when the governments of the developed world explicitly deny this and hardly anyone objects.
Put engineering schools to the test if you want to meaningfully rate them.
Since I did not graduate from MIT, I support the idea of defining the term 'best' before rolling out this list. While I can think of so many different definitions, its interesting that US News used the one 'ranking schools by number of responding graduates'. Having said that, the only value in ranking is impact on potential employers and its value in bar conversations, and I suspect that MIT will remain #1 for some time to come.
These results are not surprising. Given the economic state in recent times, many families cannot even consider choosing an institution with such rankings due to monetary concerns. It would be very interesting to see what engineering schools provide the best bang for the buck! It might seem that these extremely expensive institutions will top the list, and some may. But those smaller, often overlooked ones, barely known to the masses, might be just the ticket when trying to stretch your dollars to make ends meet. As something we address constantly, Engineers are always in tune to balance quality with cost. Knowing that your child has been given the best YOU could provide for them, is a very satifying feeling for any parent!
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.