Good points Musketeer. The electronics in aerospace and even in automotive work for many years. So it's a mystery why they break down so often in appliances. I've been lucky I guess with TV remotes. They have all outlasted my TVs. Same with DVD players, etc.
Taking into account that those "Electronics" are working fine in planes and missiles , it doesn't seem that there is a problem with the ruggedness , there might be a problem with the "brains" of the manufacturing companies ,who indeed do not enable their staff/engineers to design the product as it should be designed and spend a lot of time to reeducate their professionals toward time to market and price consciousness.
This in itself is good if you invest the means to achieve the right quality .
But then it would impact revenue.
This phenomenon is called greed.
You have a point about television e.g. but how long does a TV remote control work ?
@ Taranach : an interesing idea about the shielding screen. But I don't think that a copper screen would provide much attenuation to a 60Hz magnetic field, nor provide much of a magnetic shunt. The other thing is that in the washers and dryers that I am familiar with there is a distance of at least 2 feet between the motors and the controls electronics. On the other side, most consumer goods have a bit less than the minimum required ESD (electrostatic Discharge) protection, and so a screen plus better grounding, and probably greatly improved connections, made while adding the shielding, undoubtedly reduced the chance of failure a good deal. My guess is that it was the other things that provided the improvement in product life in this application.
Therein lies the rub... most appliances have a motor in them somewhere... usually a big, open winding, unshielded hulk of a motor that spits out electric and magnetic fields like a high pressure sprinkler. The electronics are generally not shielded enough or 'hardened' for what is the equivalent of an 'industrial' environment. Most of your purely electronic products are isolated from that environment and have only small "clean" motors at best.
I had to replace an electronics module on my washing machine and decided to encase the module in a 'Faraday cage' of copper screen that was directly earth grounded. This was the third one within a year after only one previous year of operation. I found that I did not need another one for almost five years until about a week before the motor finally failed. The new one went into the faraday cage and has been chugging along for the past four years with no further incident.
I placed a Faraday cage around every control module on an appliance that I could and have had no issues from the control module on any of them.
The explanation of non-robustness, equating to an intense lack of durability, in current and recent appliances, goes way beyond just "design for maximum profit". I have had this discussion with sales simpletons many times: I ask about quality and they respond by describing features. If I press on and ask about how long the product will work before needing repairs, I get a spiel for their service plan. When I push and ask about quality again they tell me "that quality is features". Somehow it has gotten reversed so that durability and a long lasting product are not considered selling points any more. That is why the dishwasher has a stick-on keyboard that falls off after two years. My previous one had a mechanical timer that failed after 32 years, whenthe drive motor burned out. No flimsy microcontroller to fail at the first line disturbance.
So that is where the quality went-it was exchanged for a stack of features that provide "product differentiation", which is an MBA-shool concept, I think. It is also undoubtedly cheaper than building a product to last.
I've been reading these columns for as long as they've been posted, and while I agree that for the purchaser, the stories related are heartbreaking. However, what all of you fail to remember that we are bound hook, line & sinker to the capitalistic system, and there is only ONE WORD in their dictionary, PROFIT! In order to satisfy the mandates of the investors, the demands of the unionized work force, and the forces of government (regulations, "green", etc.), the engineering team is forced into designing "durable goods" which ain't very durable anymore!!!! So, even though you might plunk down mucho dinero for your super-duper BOSCH, SIEMENS, JENN-AIR, THERMADOR, KENMORE ELITE, MAYTAG, etc., what you're buying all comes from the same box of cookies! No modern-day appliances will last the lifetime that your parents' appliances lasted. in the words of many modern-day philosophers, FUHGEDDABOUTIT!!!
There seems to be a pattern here in problems with the electronics (control board) on these new appliances. Are these applications too rugged for the electronics involved? I don't hear the same number of complaints about electronics failing in TVs or music players. It seems the big problem is the electronics in large appliances.
The "quality" in appliances has consistantly decreased in the last few decades. We are now on our 5th washing machine in 25 years with the one prior to our current one lasting less than 3 years. The technician said the circuit card was bad. after weeks and still waiting for a $250 circuit card we purchased a new machine (I wonder why the circuit card was in short supply!!). Maybe there is a market out there that will refurbish the older machines and manufacture replacement parts for the appliances like they do with classic cars. I know I'd pay a grand for a classic machine that would last 20+ years.
I agree entirely with these comments and have had a similar experience. Our 5 year old GE refigerator stopped working. The repair technician replaced the main control board and I still have the failed board clearly showing the result of leaking electrolytic capacitors. I sent a photo of the board to GE customer service. They thanked me but provided no further feedback.
As the technician was leaving, he noticed our circa 1990 Maytag washer and dryer. He indicated he had previously worked for Maytag, and he highly recommended hanging on to them as long as parts are available. He said they just dob't make them like they used to. I have been able to obtain and replace a couple of minor parts on the washer and dryer myself and they have been very reliable with regular use several times a week. We also had a 1975 vintage Kenmore (Whirlpool) refrigerator that lasted until 2006 with only one repair needed in the mid 1990's. It also survived 5 moves during that time. Certainly better than our newer GE refrigerator.
So, I concur with hanging onto appliances as long as they work. We certainly have experienced more failures on newer appliances.
With erupting concern over police brutality, law enforcement agencies are turning to body-worn cameras to collect evidence and protect police and suspects. But how do they work? And are they even really effective?
A half century ago, cars were still built by people, not robots. Even on some of the country’s longest assembly lines, human workers installed windows, doors, hoods, engines, windshields, and batteries, with no robotic aid.
DuPont's Hytrel elastomer long used in automotive applications has been used to improve the way marine mooring lines are connected to things like fish farms, oil & gas installations, buoys, and wave energy devices. The new bellow design of the Dynamic Tethers wave protection system acts like a shock absorber, reducing peak loads as much as 70%.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.