I guess I am also "old school" as I always wear a wrist watch. For the last 20 years or so I have only had Casio watches. Every one that I have had has lasted for many years, kept good time, and the battery life has been fantastic; 5 years or so. The only problem I have ever had with them is the band. But, I always replace the band with a velcro band and that has always worked fine. I will keep buying Cascio's as long as I need a watch and they are available and continue to be of the same quality and reliability.
I hate to say this but I've seen similar problems with Timex watchbands. This one kept popping open right at the piece that connects with the pin. Just seemed to be a press fit that doesn't last all the long if the watch is being worn daily. My guess is the same company makes the watchbands and they aren't so much worried about quality when, as the other poster stated, many people tend not to wear them as consistently as they once did.
Wrist watches are making a comeback as a fashion statement! Wrist watches the size of pocket watches are now cool. Vintage watches are also cool. They're even taking the Swatch® factory out of mothballs. I would find a watch as large as the current fashioon to be exceedingly cumbersome, but I guess that it's not a problem if you're already using that hand to hold up your baggy pants.
I still wear a watch. For me, it IS more convenient, more rugged, and more waterproof than my cell phone. Since 1968, I have owned many brands and styles of watches. My favorite is an analog battery powered watch with an alpha-numeric/digital readout of day, date, and time. When traveling into other time zones I can set the analog time to local time and have the digital still track the time at home to avoid calling home or office at inappropriate hours.
My everyday watch is a cheap battery powered timex expedition with indiglo face and leather watchband. This analog watch is cheap, reliable, keeps excellent time, water resistant, and is legible in the dark. I have had this watch for 8 years and am on the second band, the original unscratched crystal, and third battery. My timex watches in the 70's had more exposed face crystals which got more scratched and more easily broken. Those old wind-up watches would be off by 1 to 5 minutes a day as well. The new timex is BETTER than my old timex watches were.
I also have a Harley Davidson battery powered watch (brand?) with leather band, and two Omega self-winding mechanical watches with metal link bands, one 1950 that I inherited from my father, and one 1952 from my father's cousin, respectively. I enjoy these watches for nicer occasions, but they are not waterproof, the Omega watches should be internally cleaned annually by a jeweler for over $45, and they are too valuable to leave around. They keep excellent time, but do nothing more than my timex and don't light-up.
I agree these watches are all tools/jewelry. Use the ones you like, in the way that best serves you. By analogy, do you want to walk, ride a bicycle, ride a Segway, take the bus, ride the subway, ride a train, ride a motorcycle, drive an economy car, drive a sports car, a muscle car, a luxury car, an SUV, a boat, or drive a pick-up truck? These choices all can provide transportation between two locations, but the costs, capabilities, and features are quite different and fit different lifestyles/needs/wants.
My experience with my Costco Casio started out good, then degraded beyond correction. I didn't have the compass, altimeter, barometer or thermometer, but did have an array of various timing functions and alarms. It would adjust its time based on the closest time signal worldwide...until I mistakenly pressed some correct combination of buttons to get to one of the other modes (correct, that is, if I had held the watch with the '12' at top). Unfortunately, the room lighting was dim and the '12' was where the '6' should be. At that point, nothing I could press would get it to provide correct local time, even holding in the 'A' button for a few seconds as the master clear. Oh, I could still use it as a watch if, for example, I set it for Chicago when I was in Los Angeles. I even took it to a high-end horologist and asked him to reset it to factory defaults. He refused to take the watch from my hand and suggested I mail it back to Casio for repair. Instead, I bought a Dakota backpackers watch that I hang from a front belt loop on my trousers. It keeps great time, corrects to local time with a quick turn of the single button, and is durable. I once mistakenly left it in my shoe after going through airport security and walked down the terminal to my gate before removing it unharmed.
Although I do carry one of those incredibly useful and fun smartphones for personal use, I find it excessively inefficient to fish it out of my pocket, remove it from its case, turn it on, and enter my passcode to determine the current time when a simple twist of my wrist will suffice. It also has a number of timing applications that would work well during product testing. Unfortunately, it is a bit of a power hog and needs recharging at least once a day under normal use, two or three times a day when using apps. Timing an event with a corded tool gets to be a bit cumbersone. My watch (analog/digital Tmex with stopwatch, timer, etc.) only requires new batteries every 3-5 years (depending on the quality of the battery). Use it all of the time for times testing.
I marvel at watch design. Something which really excited me was the Bulova AccuTron using a tuning fork timebase. Only problem these days is finding the 1.35 volt battery. The mercury cell is tough to find. Now, a clever guy decided to make an equivalent by utilizing a germanium diode to drop the silver oxide cell voltage of 1.55 v to the operating level of the Bulova. How cool is that?
I have always thought the Rolex to be quite ostentatious and a poor choice for an engineer. I quit wearing a watch fairly early in my career when the band got across some hig current connections and got quite warm very quickly. My solution has been clocks on the wall in my cube and on the plant floor. "They remind us that the customer is waiting" has been my explanation, which has not been challenged. The car has a clock, the computer has a clock, and so does the darned cell phone. And if I don't wish to be disturbed, I can leave the cell phone home and go where there are no clocks, and things are a bit more peaceful.
About quality of watches: The one I got i high school still runs, it sits in a drawer, though, as a reminder of that era. People who wear a $3500 watch are no more on time than the fellow with the old Timex, so it appears that some are simply paying a whole lot for appearance. I do often wonder how a purchasing person can afford a gold and diamond watch and ten pounds of gold chains, when purchasing got paid less than engineering. I never did get an explanation for that one.
I think of watches, cell phones, iPads, etc. as "tools". Each of us has preferred tools, but few of would use a sledge hammer to drive finishing nails into woodwork. Since I keep my cell phone in my pants pocket, a digit wrist watch serves me much better when my hands are full of paint, engine oil, grass clippings, swimming, etc. I also think a cool analog watch looks good for dressup occasions! But its nice to have all these options to choose from!
Buy a Casio, they have watches with plenty of features, and the run forever. Mine is solar powered (no battery replacements) and is set automatically by radio from NIST WWV in Ft Colins, and I bought it at Costo!! It has a compus, altimiter, baromiter, thermometer and an array of stopwatches, countdown timers and alarms.
With LEDs dropping in price virtually every year, automakers have begun employing them, not only on luxury vehicles, but on entry-level models, as well.
The 3D printing revolution seems to have a knack for quickly moving technology ahead by way of collaborative effort and even a little friendly competition -- all of course in the name of scientific advancement.
Advantech has launched a new series of motion-control I/O modules to meet the increased demands that come with more distributed industrial systems that require control of a growing number of axes and devices.
Using almost 200 light-emitting diodes in the front and back of the new 2014 CTS, Cadillac designers are showing how LEDs can change the character of a vehicle.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.