Ivan: You're right. The costs will undoubtedly decline as production volume rises, and that will certainly boost sales. Most analysts say, however, that the costs won't drop below $400/kWh, and may remain as high as $650/kWh, even as economies of scale kick in. (With the exception of Tesla, which employs 18650 batteries, today's costs are approximately $800-$1,000/kWh.) Assuming an optimistic cost of $400/kWh, a 40-kWh battery will still cost $16,000.
What about the costs of producing the batteries? One way to increase demand is to drive down teh costs. I am not sure what the cost breakout is but R&D must be significant. I would also expect eh electronics to manage the battery charging and discharging to be significant as well but probably very sensitive to demand. after all once the basic controls are designed and implemented with approppriate processors they are readily amenable to cost reductions liek the rest of the digital cotnrol systems have been. The matieral cost, Lithium and some alloys I am told are not so expensive either.
As we mentioned before increasing the demand by other than EV uses might also be possible. I can see homeowners adding batteries when they can store lower cost energy for use during higher cost times that depend on their local utility cycles.
Coupling batteries with wind and solar systems would also increase demand but drives the costs of the systems up significantly.
An industry shakeout is coming for sure regardless.
You're right, Rob. High expectations play a big role in this. But the analysts we talked to allowed for a wide range of possible scenarios -- a demand of 2 GWh on the low end and 20 GWh on the high end. Even at 20 GWh, however, the demand is still about 10 GWh short of the supply. As a result, companies will still be winnowed out, even under those relatively good conditions.
In reading between the lines, Chuck, it sounds like there were high expectations for the EV market that didn't come to realization. Otherwise, why would the market pump up to the point that a shakeout is coming? Have EVs been less popular than expected? If so, why? Is it the costs? Performance issues?
With LEDs dropping in price virtually every year, automakers have begun employing them, not only on luxury vehicles, but on entry-level models, as well.
The 3D printing revolution seems to have a knack for quickly moving technology ahead by way of collaborative effort and even a little friendly competition -- all of course in the name of scientific advancement.
Advantech has launched a new series of motion-control I/O modules to meet the increased demands that come with more distributed industrial systems that require control of a growing number of axes and devices.
Using almost 200 light-emitting diodes in the front and back of the new 2014 CTS, Cadillac designers are showing how LEDs can change the character of a vehicle.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
3 
