HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Thinking_J
User Rank
Platinum
building automation
Thinking_J   9/20/2011 2:52:17 PM
NO RATINGS
The company that "we" worked for at the time ... no longer exists (recent event).

Its IP was bought up by another company.. I don't know any more than that.

I have worked on less ambitious versions with other companies since then.

At present I don't know if there is a similar product being marketed to the general public. I don't think the company (when it still existed) was marketing to the general public.. it was marketing to other companies.

Today:

- Mems devices and DSPs for vibration monitoring have become very cheap.

- 32 bit processors with enough I/0 and memory for a really smart AC for less than $10

- Current transformers, temperature sensors, humidity sensors have become very cheap.

What isn't quite so cheap.. variable speed drives and control valves appropriate in size and robustness.

The complete solution has to be very very cheap to get any "traction" in the market place.

People (until very recently) expect ROI times of less than 1 year if you want to get any real market penetration.

The time is fast approaching when all the pieces will be in place.

except... (maybe?) a company that has the market position, resources and the "will" to put it all together.

 

jimfackert
User Rank
Iron
Re: Building automation .. Mechatronics?
jimfackert   9/20/2011 12:50:36 PM
NO RATINGS
Thinking j.... if you make such a product now,  please tell me where I can learn more about it.  I have searched in vain for a commercially available smart heat pump system.

Current energy and maintainance costs are high enough for this to make sense now if it is not too costly. Preeptive maintanance alone would pay for such a system in a short time.

My $50  blender is smart... why do I have to wait for my heat pump system to fail before I know about it? and have to replace a blown compressor that apparently had been overheating due to water flow issues for months???

 

William K.
User Rank
Platinum
Mechatronic modeling?? vs HVAC power consumption?
William K.   9/9/2011 8:05:22 PM
NO RATINGS
It sounds like "thinking-J" was part of a really great product that would be in much wider use if power prices had jumped sooner. And he is certainly correct about building automation not being about turning on the lights, (or selecting the music). The real value comes from minimizing climate control system power consumption. Once we have the models for some of the basic parts, and the understanding of how they work togather, the design task becomes an excercise in fitting parts into a building that have the correct capability. Just a little thing like the fan speed /run time difference in power useage is certainly showing how to reduce power consumption without giving up performance. So I would remark to Beth that what is needed are models of the elements that make up these systems, rather than general models. So it is a specialized subset, not an additional superset, that would do the job best. 

One more comment is that diagnostics would probably not be so very "mechatronic" in nature, since most problems develop as a shift away from "the way it was initially", which can be determined with much simpler models and algorithms. So while diagnostics are certainly very valuable, they are also quite different.

Thinking_J
User Rank
Platinum
Building automation .. Mechatronics?
Thinking_J   9/9/2011 2:25:47 PM
NO RATINGS
Using a new term - mechatronics - really doesn't change anything

As to using technology to reduce power consumption.

Been there, done that.

In 1995 ... (in anticipation of electricity de-regulation).

We built a building automation system (6"x8"x2"h, basically a PC with numerous I/O - ethernet, several  RS-485 ports, RS-232 ports, Dallas sensor buses, analog and digital inputs/outputs).. ran on customized Linux...24vac...

With it we ran the building lighting/ AC (with variable speed compressors and fans) / security and simulated the building (using DOE's building simulation software originally written in fortran - hey! it was free, and it was good)..

Simulation of the entire building was running in the background - ALL the time.

On the small businesses this was focused on addressing.. we could project 24hrs in advance the power requirement within 1-2% accuracy. It reduced peak power requirements by 50%, and average power requirements by 30%. Truly information for a "smart grid" (power company - with entire communities needs known in advance).

Also allowed detailed evaluation of the maintenance of the building/system.

If a filter needed replacement.. we knew it before it created problems.

If a compressor was having problems... we knew it before it failed.

The system knew : typical occupancy for any day of the week, the local weather (via the web), room usage, performance of the AC system...

Then the pressure to address deregulation was removed (98)..killed further advancement.. though the product (in newer incarnations) stills lives.

It is amazing how much electricity is saved with just a smarter AC system (with variable speed compressors/fans and truely smart controls.

Primary reason: compressability of air. 

example: a fan running at full speed with a 50% duty cycle (say a cycle of 5 minutes) will consume twice the power of same fan running at 50% speed 100% duty cycle. (power consumption is cubed as speed increases by 2)

To keep the rest of the system optimal under varying conditions (Humidity, heat load, etc...) requires much more complex controls (to keep the coils from freezing up, etc...)

Pay back period for additional technology being installed? less than 2 years (in 95).. likely 6 months today.

Best you can buy for your home today .. two speed / two compressor based system for (a great improvement old systems.. but could be soo much better)...

Real home automation? Isn't about remote controls of the lights.

Real automation? it about the building maintaining it self with minimal power.

 

 

 

SalvadorRomo
User Rank
Iron
Modeling approach
SalvadorRomo   9/9/2011 10:32:59 AM
NO RATINGS
I actually like a lot the chart, and excellent way to describe complexity vs modeling and simulation. Thanks great article.

Rob Spiegel
User Rank
Blogger
Re: Energy savings
Rob Spiegel   9/8/2011 12:09:00 PM
NO RATINGS
Interesting story, Chuck. Any idea what levels of savings come from the modeling?

Charles Murray
User Rank
Blogger
Energy savings
Charles Murray   9/8/2011 9:54:48 AM
NO RATINGS
Where energy is concerned, a perfect storm is approaching: less coal and nuclear-based power; more renewables; and more electric cars. Widespread modeling like the kind shown here is going to be critical, if we expect to continue our standard of living. Imagine being able combine this kind of building modeling with broad use of LEDs. The energy savings would be gigantic.

Beth Stackpole
User Rank
Blogger
Availability of tools
Beth Stackpole   9/8/2011 9:28:50 AM
NO RATINGS
Seems like standard system modeling tools would fit the bill here or is there a more specialized capability set required for building system design?

Douglas Smock
User Rank
Platinum
Applicability
Douglas Smock   9/8/2011 8:44:59 AM
NO RATINGS
Very interesting. Do you think it would be practical to apply this approach to installed systems?



Partner Zone
Latest Analysis
Adam Berger hacked a computer keyboard into a mini key-tar to play with his band.
Altair has released an update of its HyperWorks computer-aided engineering simulation suite that includes new features focusing on four key areas of product design: performance optimization, lightweight design, lead-time reduction, and new technologies.
At IMTS last week, Stratasys introduced two new multi-materials PolyJet 3D printers, plus a new UV-resistant material for its FDM production 3D printers. They can be used in making jigs and fixtures, as well as prototypes and small runs of production parts.
In a line of ultra-futuristic projects, DARPA is developing a brain microchip that will help heal the bodies and minds of soldiers. A final product is far off, but preliminary chips are already being tested.
If you're planning to develop a product that uses a microcontroller, you'll want to take note of next week's Design News Continuing Education course, "MCU Software Development A Step-by-Step Guide."
More:Blogs|News
Design News Webinar Series
9/10/2014 11:00 a.m. California / 2:00 p.m. New York
7/23/2014 11:00 a.m. California / 2:00 p.m. New York
7/17/2014 11:00 a.m. California / 2:00 p.m. New York
6/25/2014 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Sep 22 - 26, MCU Software Development A Step-by-Step Guide (Using a Real Eval Board)
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: September 30 - October 2
Sponsored by Altera
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service