Bandwidth and cost. There are a limited number of frequencies made available for wireless remotes and a much larger number of remote controller consumer devices. It's a lot easier to share frequencies if the range is limited. If my remote's power (and thus range) is so limited that I can't possibly change channels on my neighbor's identical set, our remotes can be interchangeable and extremely cheap. If they had longer range, they'd need a bluetooth-like pairing scheme and spread-spectrum channel allocation, making them more costly and less "user friendly." The cheap, range limited remotes just work.
I built something with a similar function, but set to a timer to let our dog out at a specific time. I created a vessel using PVC pipe and end caps, plus a tire valve. I charged it with compressed air as my energy source. I wired a sprinkler solenoid to release the air, which acted on an air cylinder that was the deadbolt for the kennel. A bungee cord swung the door open so he could get out.
It wasn't about being lazy as someone else mentioned. We kept the dog in a kennel in the garage after we left for work, so he wouldn't disturb the neighbors at an early hour. After getting out of the kennel, he had access to the yard.
The main reason I am not inpressed is the over use of China products. I would like to see a better use of American made products. We as a country need to support our American manufacturers and workers.
Also, the gadget is a little too simple with no real consumer value. I still have to get up and go outside to put the animal back in the cage. People are becoming too lazy and over dependant on technology.
Actually I had the same problem with the privacy fence gate at the side of my house. After seeing what some companies offered and charged, I about passed out. The solution was simple and required no batteries! I took a few i/4' Dia eye bolts and a long length of 1/8 Dia polyester cord. One of the eye bols I used for the locking bolt and the others were used as stand-offs/guides for the cord. I dressed the end of the cord off with a 1 1/2' Dia wooden ball with a 3/16 Dia. hole drilled through it and tied a stopper knot at the end. Pulling the ball pulls the eye bolt out of the gate padlocking plates. The great thing about this design is, all components were made right here in the USA.
If I had to go through a wall I would of inserted a tube through a wall opening, flanged and caulked both ends, and used a fancy wine bottle cork that fitted the inside opening and fitted this to end the cord!
Now I could add one of those flashing red lights they sell for bicycles if some of you electro guys need to have something that glows to look at!
I know lots of people in the semi-rural area where I live who'd love a device like this for their chicken coops and horse pens, especially in the winter. I have to agree with Doug, though, it seems a bit hard to believe something doesn't exist out there to do this. The other option for the pooches is the good old electric fence and doggie door. That's our set up and my dogs go in and out at their leisure.
Again, we have a gadget that goes through walls. And again, it makes me wonder why our common remotes are so weak. If our gadget freaks can make remotes that go through walls, why isn't that feature more common with consumer electronics?
Seems pretty hard to believe something like this isn't already available. The video demonstration would have been more effective if done at a distance showing the ability to go through walls and other obstacles.
The first Tacoma Narrows Bridge was a Washington State suspension bridge that opened in 1940 and spanned the Tacoma Narrows strait of Puget Sound between Tacoma and the Kitsap Peninsula. It opened to traffic on July 1, 1940, and dramatically collapsed into Puget Sound on November 7, just four months after it opened.
Noting that we now live in an era of “confusion and ill-conceived stuff,” Ammunition design studio founder Robert Brunner, speaking at Gigaom Roadmap, said that by adding connectivity to everything and its mother, we aren't necessarily doing ourselves any favors, with many ‘things’ just fine in their unconnected state.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.