HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
William K.
User Rank
Platinum
Low efficiency beacon symptom
William K.   9/23/2011 9:18:01 PM
NO RATINGS
The problem of moisture absorbtion is often nonlinear, which is why just baking the deteriorated units would not result in another five years of service. What probably happened is that after a bit of exposure the more moisture resistant portion deteriorated and the more porous material was exposed, at which point the process went much faster. So baking and re-coating could have been a solution, but the cost would probably be similar to installing a new antenna. Sometimes repairs are completely possible but not economical to do. Given what I know about high labor costs on railroads, I would presume that was the case here.

Yes, it was good detective work, although great detective work would have been to stop and think for a while and come with a suspect at the beginning.

dhall
User Rank
Iron
Re: Troubleshooting
dhall   9/1/2011 8:45:23 PM
NO RATINGS
If the parts absorbed moisture, why wouldn't baking them drive the moisture out and give you another 5 years of operation?  Obviously the design was faulty, but cycling the devices periodically through a drying operation could potentially save having to replace them unless they were very inexpensive and the cost of handling exceeded the replacement cost.

plasticmaster
User Rank
Silver
Re: Troubleshooting
plasticmaster   9/1/2011 9:30:42 AM
NO RATINGS
PTFE (DuPont "Teflon") is hydrophobic (water repelling). PET (material of the aforementioned housing) is hygroscopic (water absorbing). I know long term testing is sometimes sacrificed in order to get product to market. In this case the product worked for 5 years before failure. I would imagine, realistically, that when the problem was discovered, the solution would be to change the material to something better suited for long term outdoor use.

Sometimes the more expensive material is the cheaper (or should I say, more economical) and better choice in the long run.

tjgau
User Rank
Iron
Re: Troubleshooting
tjgau   8/31/2011 9:36:05 PM
NO RATINGS
I think it would have been a combination of incomplete specification & manufacturing (Moulding process & cleanness).
The materials used were those specified by the original European design. The manufacture of this product was taken over by another company shortly after so there was no further trend analysis data to see if the problem continued to other batch lots.

Toni

Jack Rupert, PE
User Rank
Platinum
Re: Troubleshooting
Jack Rupert, PE   8/31/2011 7:56:03 PM
NO RATINGS
So, was the root cause of the problem a specification problem, material choice, or manufacturing?

Tim
User Rank
Platinum
Troubleshooting
Tim   8/31/2011 5:32:02 PM
NO RATINGS
Good troubleshooting. It shows that even solid components can have a problem in them.



Partner Zone
Latest Analysis
(Video) NASA's Modular Robotic Vehicle (MRV) is an EV inspired by manned rovers used for space exploration.
Comedian John Oliver recently did a segment on patent trolls, offering a hiliarious take on a serious issue plaguing US industries.
United Launch Alliance will fly 3D-printed flight hardeware parts on its rockets starting next year with the Atlas V. The company's Vulcan next-gen launch vehicle will have more than 100 production parts made with 3D printing. The main driver? Parts consolidation and 57% lower production costs.
The new small-form-factor EZ-BLE PRoC (Programmable Radio on Chip) module is a derivative of the existing PRoC BLE Programmable Radio-on-Chip solution. The EZ-BLE PRoC module integrates the programmability and ARM Cortex-M0 core of the PRoC BLE, two crystals, an onboard chip antenna, a metal shield, and passive components.
The engineers and inventors of the post WWII period turned their attention to advancements in electronics, communication, and entertainment. Breakthrough inventions range from LEGOs and computer gaming to the integrated circuit and Ethernet -- a range of advancements that have little in common except they changed our lives.
More:Blogs|News
Design News Webinar Series
3/31/2015 11:00 a.m. California / 2:00 p.m. New York
2/25/2015 11:00 a.m. California / 2:00 p.m. New York
12/11/2014 8:00 a.m. California / 11:00 a.m. New York
5/7/2015 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
May 4 - 8, Designing Low Power Systems using Battery and Energy Harvesting Energy Sources
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Last Archived Class
Sponsored by Proto Labs
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2015 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service