Marty, between greenfield & brownfield; if an enclosed wireless system (not 802.11) were to deploy, which field to your experience has the highest acceptance rate to accept wireless systems into their industrial environment? Why?
Additional answer to cgervasi although DFS channels may be available customers have found it better to not bother or stay way becasue sometimes if your are near an airport thsi can be a cause a conflict
I ask b/c I've worked on wireless equipment in the past. The DFS channels are tricky because you have to vacate them for a period of time if you detect radar. I never found an easy way to get all nodes off a channel when one unit detects radar and then to get them back to that channel once the silent period expired. I imagine someone will come up with a good way to do it eventually, esp as the other 5GHz channels get crowded.
Oh, I'm getting a delay in the chat. My only question was whether the so-called DFS channels are usable? Can equipment intelligently choose another channel when radar is detected and perhaps move back when radar is gone?
I wonder if there is any way to use channels in the "DFS" (radar-detection required) bands can be used reliably. They're clearer, but you have to be prepared to vacate them as soon as you hear any radar signals.
Rob, IMHO it's easier to do DoS attack. My impression, though, is that AES encryption is really as good as wired. No one wants to say it's "wired equivalent" since an easy crack was found for a scheme by that name.
Engineers at Fuel Cell Energy have found a way to take advantage of a side reaction, unique to their carbonate fuel cell that has nothing to do with energy production, as a potential, cost-effective solution to capturing carbon from fossil fuel power plants.
To get to a trillion sensors in the IoT that we all look forward to, there are many challenges to commercialization that still remain, including interoperability, the lack of standards, and the issue of security, to name a few.
This is part one of an article discussing the University of Washington’s nationally ranked FSAE electric car (eCar) and combustible car (cCar). Stay tuned for part two, tomorrow, which will discuss the four unique PCBs used in both the eCar and cCars.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.