View Comments: Newest First|Oldest First|Threaded View
User Rank
Re: Interesting
ljkdvoein   4/22/2014 8:03:15 PM
To find a good printer in Canada. I would suggest using the following companies: Toronto Printer | Calgary Printer | Winnipeg Printer | Montreal Printer | Regina Printer | Saskatoon Printer | Quebec Printer | Ottawa Printer | Edmonton Printer | Vancouver Printer | These companies provide the best and most affordable price in whole Canada. Other printing companies I suggest would be Print Quote Services | Printing Company | Best Local Printer | Some other local cities have great printers as well such as the following: Charlotte Printing | Dallas Printing | Nashville Printing

Nowadays, it is hard to find quality print trader. This is my recommendation for best print trader in the united states Best Print Trader | Lowest Price Printing Wholesale | Print Outsourcing | Print Broker Trade

Lastly, all print should comes with a state of the art Print Management Software. I would highly recommend this print software tool.

User Rank
Re: One percent per mile?
Optimyst   2/13/2013 11:11:54 AM
Given the project's emphasis on energy efficiency and recharging from a compact solar array, i would imagine they are suggesting that the Urbee can be recharged and operated by harnessing 1% of the sun's energy that would fall upon the roof of a small garage or carport.

User Rank
Re: One percent per mile?
Kevin   3/26/2012 5:36:02 PM
Actually, my guess is that Urbee is trying to imply that the car can run on as little as 1% of the energy of a conventional car....a highly doubtful claim (but similar to claims from many of the other EV makers).  They claim it can get up to 200 MPGe (my car gets infinite MPG when rolling down a hill with the engine off !).

While I like the <concept> of the Urbee for an URBAN vehicle, it has a few weaknesses. 

1.  Choosing a 3-wheeled configuration is a double-edged sword: it makes safety certifications much easier (because it is certified as a MOTORCYCLE, not a CAR).  However, I don't think most people are going to be interested in buying a 3-wheeled car (probably a key issue in Aptera's demise...along with unrealistic expectations).

2.  The body has a cute "pod-like" appearance.  Clearly a big part of their focus was aesthetics.  However, with its very narrow 3-tire footprint it will probably not handle very well.   I guess this would not really be as big an issue if the car is never driven at freeway speeds.

3.  I have yet to see real-world Cd Aero drag figures, actual detailed MPGe data, etc.  My guess is that their efficiency claims are based more on hope than data.

In the Automotive X-Prize, there were 2 winners (of respective categories), and those two entries were both head-and-shoulders above the others.  See below.  While MANY of the entries were creative and great efforts, only a few had the sophistication that could actually be taken to successful production cars (in my opinion):


http://monotracer.com/index.php?lang=en   (actually a fully-faired motorcycle with automatic training-wheels.  See the videos. 

Also, I'd give an honorable mention to the following participants, who didn't win but had very respectable entries:



http://www.tw4xp.com/   This car is probably CLOSEST to the URBEE in concept as a very small Urban pod.  I believe it actually has bicycle-style pedal assist too!  Good to stay in-shape and save more energy...


Greg M. Jung
User Rank
Re: One percent per mile?
Greg M. Jung   3/25/2012 3:25:04 PM
I also agree it was a little confusing.  The 100 mile range was the only logical interpretation of this statement.

On a different note however, I am impressed with the innovative thinking to use 3D printing for low-volume production runs.  The application of this technology makes great sense for high-mix, low-volume products...especially considering the cost-savings in eliminating expensive tooling.

User Rank
Re: One percent per mile?
ervin0072002   3/25/2012 12:21:46 PM

Yea that 1% has me confused too. 1% of what? the power of a nuclear plant? 1% of the power from a 200MW power station? 1% of the power that a motorcycles engine delivers? or 1% of the power that a Hummer H1 Delivers?


I think the intended message was very light, very efficient, and cheap personal transport. I doubt you can take your wife, dog, and two kids out to the beach with that thing?


Also don't forget that we sacrifice performance for efficiency. There is a lot of people in Florida that shut off their AC in the car close the windows and boil at 120F temperature that most cars have during the summer in the name of efficiency... You won't see me doing that though.

And yes water can boils even at freezing temperature it all depends on vapor pressure. I almost feel a funny comment comming to the "boils at 120F ..." that i said above.

Dave Palmer
User Rank
One percent per mile?
Dave Palmer   8/22/2011 2:51:20 PM
What does it mean that it will "run on as little as 1 percent of energy per mile travelled"? Does this mean that the range is 100 miles? It strikes me as a very odd statement.

Partner Zone
Latest Analysis
Imagine being able to illegally download a physical product the same way you can with music and videos. That’s basically what’s happening with 3D printing and digital manufacturing, with huge repercussions in the intellectual property domain.
Our latest Design News Quick Poll reveals that readers are facing serious cyber security challenges.
Ford will be the first automaker to commercially use Alcoa's tough & fast Micromill aluminum alloy process and materials, debuting on several 2016 F-150 truck components. Alcoa will also license its Micromill process and materials technology to Danieli Group.
Even as an increasing number of instrument manufacturers migrate toward modern touch screens, many engineers say they still prefer the tactile feel of knobs and buttons, a new survey says.
Caterpillar Inc. demonstrated this week at Design and Manufacturing Philadelphia that heavy industry can reap big benefits from 3D printing.
Design News Webinar Series
10/1/2015 11:00 a.m. California / 2:00 p.m. New York
9/10/2015 11:00 a.m. California / 2:00 p.m. New York
10/20/2015 8:00 a.m. California / 11:00 a.m. New York
11/10/2015 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Oct 5 - 9, Standards for the Internet of Things (IoT)
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7

Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2015 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service