The volume control has an auxiliary output for an optional audio switch to turn a subwoofer or audio system on and off with the incoming signal. If you are not going to use that, you can delete R2, R3, R8, D1 and D2. Add a wire in place of the diodes (between U4 pins 1 and 2).
No, It's not a Hammond enclosure. It's Radio Shack 270-1803. The link I sent you earlier has the part numbers and sources of parts not available at Allied. Since Allied sponsors this blog, they don't like people to mention the sources of parts they don't sell. That's why I sent you to my YouTube page.
It has to be an amplified speaker system connected to the TV (i.e. line-level or headphone-level signals). The volume control cannot control the speakers directly. If it is a line-level signal, delete the 100 ohm resistors at the input.
I built two remote volume controls and one of them is connected to a TV volume regulator, which has a line-level output. If the remote volume control is being connected to a headphone jack, the 100 ohm resistors are needed to allow the TV, or whatever, to sense the load and switch its internal speakers off. Most electronics nowadays use electronic means to detect a load on the headphone jack and switch off the built-in speakers. Gone are the days of having a mechanical switch in the headphone jack.
Thank you, yes, I have been thinking about asking you about programmed PICs. I am currently trying to source all the parts without paying too much shipping. If that is not too much hassle I may get a pickit2 and program it myself. If it's big hassle I may ask you for PICs to save some time. I'll let you know via email.
Lantronix Inc. has expanded its line of controllers for sensor networks with the release of a rugged controller that improves management of automation systems used in a number of industries, including manufacturing, oil and gas, and chemicals.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is