HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Page 1/2  >  >>
armorris
User Rank
Platinum
A PCB is available
armorris   9/27/2014 12:23:10 PM
NO RATINGS
One of my readers has designed a PCB (printed circuit board) for my gadget. He designed it to accomodate multiple configurations. That means what you do with the extra op-amp. For example, he uses it as a third channel for his high-end subwoofer. If you want a PCB, email me and I'll hook you up to him. I'm not making anything off of this project. I just want people to enjoy my gadget.

armorris
User Rank
Platinum
Using a different remote control system
armorris   2/4/2014 7:36:41 AM
NO RATINGS
A reader wanted to use a different remote control system with greater range for outdoor use. I redesigned the pot controller chip to accomodate two momentary inputs (UP and DN). I also rewrote the remote receiver code to produce two momentary outputs, originally to test the pot controller. My email address is in the article.  Please email me if you would like a copy of this code or preprogrammed chips.

armorris
User Rank
Platinum
Re: Enclosure
armorris   10/11/2012 4:34:22 PM
NO RATINGS

Also, if you're not going to drive a low impedance load like headphones, you can delete transistors Q1 and Q2. I would leave R7 in place as the capacitors C1, C2, C3 and C4 could make U4 unstable.

armorris
User Rank
Platinum
Re: Enclosure
armorris   10/11/2012 3:48:55 PM
NO RATINGS

The volume control has an auxiliary output for an optional audio switch to turn a subwoofer or audio system on and off with the incoming signal. If you are not going to use that, you can delete R2, R3, R8, D1 and D2. Add a wire in place of the diodes (between U4 pins 1 and 2).

dgrant
User Rank
Iron
Re: Enclosure
dgrant   10/11/2012 3:06:35 PM
NO RATINGS
Aha! Sorry I didn't see the extended text beneath the youtube video.

armorris
User Rank
Platinum
Re: Enclosure
armorris   10/11/2012 3:04:15 PM
NO RATINGS
No, It's not a Hammond enclosure. It's Radio Shack 270-1803. The link I sent you earlier has the part numbers and sources of parts not available at Allied. Since Allied sponsors this blog, they don't like people to mention the sources of parts they don't sell. That's why I sent you to my YouTube page.

dgrant
User Rank
Iron
Enclosure
dgrant   10/11/2012 2:39:52 PM
NO RATINGS
Is that a Hammond enclosure?

dgrant
User Rank
Iron
Re: Additional info
dgrant   10/11/2012 2:32:20 PM
NO RATINGS
Great, thanks for the heads-up. I will have to remove the 100 ohm resistors because I will be connecting to the line-level outputs of a TV.

armorris
User Rank
Platinum
Re: Additional info
armorris   10/11/2012 2:21:35 PM
NO RATINGS
It has to be an amplified speaker system connected to the TV (i.e. line-level or headphone-level signals). The volume control cannot control the speakers directly. If it is a line-level signal, delete the 100 ohm resistors at the input.

I built two remote volume controls and one of them is connected to a TV volume regulator, which has a line-level output. If the remote volume control is being connected to a headphone jack, the 100 ohm resistors are needed to allow the TV, or whatever, to sense the load and switch its internal speakers off. Most electronics nowadays use electronic means to detect a load on the headphone jack and switch off the built-in speakers. Gone are the days of having a mechanical switch in the headphone jack.

dgrant
User Rank
Iron
Re: Additional info
dgrant   10/11/2012 1:42:02 PM
NO RATINGS
Thank you, yes, I have been thinking about asking you about programmed PICs. I am currently trying to source all the parts without paying too much shipping. If that is not too much hassle I may get a pickit2 and program it myself. If it's big hassle I may ask you for PICs to save some time. I'll let you know via email.

Page 1/2  >  >>


Partner Zone
Latest Analysis
Advertised as the "Most Powerful Tablet Under $100," the Kindle Fire HD 6 was too tempting for the team at iFixit to pass up. Join us to find out if inexpensive means cheap, irreparable, or just down right economical. It's teardown time!
The first photos made with a 3D-printed telescope are here and they're not as fuzzy as you might expect. A team from the University of Sheffield beat NASA to the goal. The photos of the Moon were made with a reflecting telescope that cost the research team 100 to make (about $161 US).
At Medical Design & Manufacturing Midwest, Joe Wascow told Design News how Optimal Design prototyped a machine that captures the wing-beat of a duck.
The increased adoption of wireless technology for mission-critical applications has revved up the global market for dynamic electronic general purpose (GP) test equipment. As the link between cloud networks and devices -- smartphones, tablets, and notebooks -- results in more complex devices under test, the demand for radio frequency test equipment is starting to intensify.
Much of the research on lithium-ion batteries is focused on how to make the batteries charge more quickly and last longer than they currently do, work that would significantly improve the experience of mobile device users, as well EV and hybrid car drivers. Researchers in Singapore have come up with what seems like the best solution so far -- a battery that can recharge itself in mere minutes and has a potential lifespan of 20 years.
More:Blogs|News
Design News Webinar Series
10/7/2014 8:00 a.m. California / 11:00 a.m. New York
9/25/2014 11:00 a.m. California / 2:00 p.m. New York
9/10/2014 11:00 a.m. California / 2:00 p.m. New York
7/23/2014 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Oct 20 - 24, How to Design & Build an Embedded Web Server: An Embedded TCP/IP Tutorial
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: 10/28-10/30 11:00 AM
Sponsored by Stratasys
Next Class: 10/28-10/30 2:00 PM
Sponsored by Gates Corporation
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service