HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
REGISTER   |   LOGIN   |   HELP
Page 1/2  >  >>
armorris
User Rank
Platinum
Using a different remote control system
armorris   2/4/2014 7:36:41 AM
NO RATINGS
A reader wanted to use a different remote control system with greater range for outdoor use. I redesigned the pot controller chip to accomodate two momentary inputs (UP and DN). I also rewrote the remote receiver code to produce two momentary outputs, originally to test the pot controller. My email address is in the article.  Please email me if you would like a copy of this code or preprogrammed chips.

armorris
User Rank
Platinum
Re: Enclosure
armorris   10/11/2012 4:34:22 PM
NO RATINGS

Also, if you're not going to drive a low impedance load like headphones, you can delete transistors Q1 and Q2. I would leave R7 in place as the capacitors C1, C2, C3 and C4 could make U4 unstable.

armorris
User Rank
Platinum
Re: Enclosure
armorris   10/11/2012 3:48:55 PM
NO RATINGS

The volume control has an auxiliary output for an optional audio switch to turn a subwoofer or audio system on and off with the incoming signal. If you are not going to use that, you can delete R2, R3, R8, D1 and D2. Add a wire in place of the diodes (between U4 pins 1 and 2).

dgrant
User Rank
Iron
Re: Enclosure
dgrant   10/11/2012 3:06:35 PM
NO RATINGS
Aha! Sorry I didn't see the extended text beneath the youtube video.

armorris
User Rank
Platinum
Re: Enclosure
armorris   10/11/2012 3:04:15 PM
NO RATINGS
No, It's not a Hammond enclosure. It's Radio Shack 270-1803. The link I sent you earlier has the part numbers and sources of parts not available at Allied. Since Allied sponsors this blog, they don't like people to mention the sources of parts they don't sell. That's why I sent you to my YouTube page.

dgrant
User Rank
Iron
Enclosure
dgrant   10/11/2012 2:39:52 PM
NO RATINGS
Is that a Hammond enclosure?

dgrant
User Rank
Iron
Re: Additional info
dgrant   10/11/2012 2:32:20 PM
NO RATINGS
Great, thanks for the heads-up. I will have to remove the 100 ohm resistors because I will be connecting to the line-level outputs of a TV.

armorris
User Rank
Platinum
Re: Additional info
armorris   10/11/2012 2:21:35 PM
NO RATINGS
It has to be an amplified speaker system connected to the TV (i.e. line-level or headphone-level signals). The volume control cannot control the speakers directly. If it is a line-level signal, delete the 100 ohm resistors at the input.

I built two remote volume controls and one of them is connected to a TV volume regulator, which has a line-level output. If the remote volume control is being connected to a headphone jack, the 100 ohm resistors are needed to allow the TV, or whatever, to sense the load and switch its internal speakers off. Most electronics nowadays use electronic means to detect a load on the headphone jack and switch off the built-in speakers. Gone are the days of having a mechanical switch in the headphone jack.

dgrant
User Rank
Iron
Re: Additional info
dgrant   10/11/2012 1:42:02 PM
NO RATINGS
Thank you, yes, I have been thinking about asking you about programmed PICs. I am currently trying to source all the parts without paying too much shipping. If that is not too much hassle I may get a pickit2 and program it myself. If it's big hassle I may ask you for PICs to save some time. I'll let you know via email.

armorris
User Rank
Platinum
Re: Additional info
armorris   10/10/2012 11:41:39 PM
NO RATINGS
The resistance of the pots is 10K. See this link for further information.

http://www.youtube.com/watch?v=tyes_H9zIc8&feature=youtu.be

Let me know if you need me to send you programmed PICs. My email address is in the article.

 

Page 1/2  >  >>


Partner Zone
Latest Analysis
The National Highway Traffic Safety Administrationís recent backup camera mandate could open the door to more vehicle innovations, including better graphical displays, 360-degree camera views, and the increased use of Ethernet.
With support from National Instruments, a group of dedicated students from Connally High School in Austin, where more than 50% of the students are at risk of not graduating, have created a successful robotics team that is competing in the FIRST World Championships.
Solar Impulse 2 -- a 100% solar-powered airplane -- has been completed. It features several advanced materials, some developed specifically for next year's attempted around-the-world flight.
Sherlock Ohms highlights stories told by engineers who have used their deductive reasoning and technical prowess to troubleshoot and solve the most perplexing engineering mysteries.
Lumus and eyeSight have partnered to create consumer-grade devices that offer all the prime functions of smart glasses without the bulk.
More:Blogs|News
Design News Webinar Series
3/27/2014 11:00 a.m. California / 2:00 p.m. New York / 7:00 p.m. London
2/27/2014 11:00 a.m. California / 2:00 p.m. New York / 7:00 p.m. London
12/18/2013 Available On Demand
11/20/2013 Available On Demand
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Apr 21 - 25, Creating & Testing Your First RTOS Application Using MQX
SEMESTERS: 1  |  2  |  3  |  4  |  5


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: April 29 - Day 1
Sponsored by maxon precision motors
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Datasheets.com Parts Search

185 million searchable parts
(please enter a part number or hit search to begin)
Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service