Thanks Chuck. Has the electric vehicle (EV) world matured enough for consumers to take battery replacement into account as part of the price of owning an EV? With traditional vehicles, consumers have a pretty good idea how often they will have to replace various part of the car. And they have a pretty good idea of the relative cost of that maintenance. Has battery replacement become part of the consciousness of the EV owner?
Rob: Battery deterioration is a slippery subject. It depends on age, mileage and repeated deep cycling of the battery. The advantage of this battery, however, is that it should be less costly replace than, say, a Volt or Leaf battery, because it's significantly smaller.
Beth: This vehicle is truly different than its predecessor because it enables certain drivers, especially those who make a lot of short trips, to run in pure electric mode for a high percentage of the time. Theoretically, it's possible that your father wouldn't have to add gasoline for weeks or even months, depending on how diligent he is about recharging. That said, it's not for everyone. People who have a longer drive to work -- for example, 15 or 20 miles each way -- would probably be better served by the old Prius powertrain architecture.
When I first heard Chevy say, "the Volt is not any kind of hybrid, it's an EREV [extended-range electric vehicle]," I rolled my eyes back into my head. "Don't give me all that marketing hype; it's simply a series hybrid with a big battery."
However, as I read more about the Volt, the Leaf, and the plug-in Prius, I'm starting to accept that it really isn't strictly marketing fluff. The lifestyle differences for these vehicles really is very significant. It's clear to me that the plug-in Prius is still fundamentally a hybrid: A car with multiple, heterogeneous power sources, with a computer system that attempts to find the optimal balance between those sources. In short, it's a vehicle whose goal is to harvest the best aspects of each power source. The only big difference is that they beefed up the battery and made it externally rechargeable.
Although the volt is in fact a (series) hybrid, clearly it's design goals are totally different: To give you a limited range of pure-electric driving, with a gasoline backup. The Leaf, obviously, is intended for a less-limited range, but with no backup. The plug-in Prius does not appear to be intended to function for any significant period of time completely free of gasoline, so it is still truly a hybrid vehicle.
By the way, Mr. Murray, I doubt if the "99.9"MPG number you saw was a true reflection of the mileage you were getting. Priuses have always had mileage displays, instantaneous and cumulative, that "peg out" (saturate) at 99.9MPG. In other words, you were actually getting over 99.9MPG, with no indication of how much more.
Question: Does this Prius insist upon buring gas just simply to warm up the engine after you fire it up? Yes, yes, I understand why they do this: The Prius' power-split-device-based drive system means that the engine turns over most of the time that you're not a complete stop, even if it doesn't get fuel or spark. So they decided that you have to warm up the oil or the engine will suffer excessive wear and cause drag. In this particular case, however, where the real benefit is that short trips (and I for one make a lot of very-short trips to the grocery store and such) use hardly any gas at all. If they do insist on warming up the engine, it would pretty nearly negate any benefit, it would seem.
A few months ago, I read a very-interesting book called "Electric Vehicle Technology Explained" - a very good wrap-up (although slightly out-of-date) of EV technology. Probably about a third of the book was about various battery technologies.
Short summary, battery deterioration over time can comes, mainly, from two sources: heat and overcharging, both of which can cause electro-chemical degrade over time. I'm pessimistic about Nissan's claim that the Leaf's battery doesn't need any form of cooling system. Chevy and Tesla seem to be convinced that very considerable cooling systems are critical. The fact that Nissan designed its battery in modules makes me wonder if they anticipate a need for it to be replaced over time, and tried to reduce the impact by allowing you to replace only portions of it. I don't know, but I just have to wonder...
For whatever it's worth, my 2009 Prius' NiMH has a very-definite, but simple, cooling system - just convection cooling. Existing-Prius batteries have a long history of not showing very much degrade over time. This new one, however, uses an all-new chemistry, and presumably a different architecture, which could affect the effects of overcharging, a certain amount of which is unavoidable (unless you put the cells of the batteries purely in parallel, which is not realistic).
My personal guess would be that it won't degrade much over time, but I don't have any really specific information to base that guess upon.
Looks pretty cool, Chuck. Question for you: My dad owns the original Prius. Any sense of whether this new offering would compel an existing Prius owner like him to want to trade up to the new model or whether this is more a play for attracting new Prius converts?
Hey Chuck, one thing I've wondered about with these batteries is whether there is deterioration over time. After months or years of recharging, will they lose the 13-mile reach? I would think the battery would become less powerful after countless recharges. How do these vehicles hold up in general over the long haul?
Jenn: I didn't time it myself, but the time is generally assumed to be around ten seconds. The acceleration characteristics of the this vehicle aren't great, but they are no worse than the conventional Prius. The electric powertrain provides about 60 kW. But if you're accelerating full-on, then you'll need about 120 to 150 kW, so the Prius Hybrid Synergy Drive has to kick in to make up the difference.
Siemens and Georgia Institute of Technology are partnering to address limitations in the current additive manufacturing design-to-production chain in an applied research project as part of the federally backed America Makes program.
Most of the new 3D printers and 3D printing technologies in this crop are breaking some boundaries, whether it's build volume-per-dollar ratios, multimaterials printing techniques, or new materials types.
Independent science safety company Underwriters Laboratories is providing new guidance for manufacturers about how to follow the latest IEC standards for implementing safety features in programmable logic controllers.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.