Design News you can use. I have just been diagnosed with Idiopathic Pulmonary Fibrosis. I'm 66 years old and was planning a long retirement after a career as an automotive engineer. Now the prognosis is 3 to 5 years with the possibility of a lung transplant in the future. There is currently no cure.
I will be following this project with great interest.
I'm very impressed with the progress made in this field! My father was involved in the manufacture of heart/lung machines in the 1960s. Info on machines of that time is available at:
Doug, excelent article, I wish if in addition to the interdicipline mentioned in another post, at some point there is an story about the equipment used for the CAD design and the Additive Manufacturing.
Hi Alex. I am the lead researcher on the work and Doug asked me to log in and comment about our research team. Our cross-disciplinary team involves the following:
* One specialist in microfabrication and microfluidics (myself)
* One cardiothoracic surgeon and one pulmonary physician
* Two experts in bio- and blood- compatible coatings
* One expert in biomimetic artificial vasculature who also has some previous experience in artificial lung design.
As you can see, we have quite a wide array of backgrounds which are all needed to make this project a success. However, as part of this project, we are all experiencing some cross training which is making us better at what we do as well.
Please let me know if you have any other questions.
I absolutely agree Ohms. The human body is a wonder that no engineer or scientist could ever begin to replicate in a meaningful way. The great advance I described at CWRU only lasts a few hours in the lab. We are taking steps tinier than the tiniest baby steps. And even those accomplishments are inspiring.
Any attempt to mimic human parts will be humbled by the truly amazing human ability for reliability, performance and size and certainly requires expertise in dozens of fields of science.
Considering we can survive contstant attack of viruses and bacteria and other parasites. Also we don't often rust, or need a power flush, routine change of antifreeze or need CLR flush treatments and use nano-osmotic effects to exchange CO2 for O2 and aren't affected much by microwave and RF ringing thru our lungs and can cough sputum if needed.... and oh ya have an automatic or manual feature with a lifetime warranty on the air pump in our bellies.
.... a man-made design has a tough job to mimic a lung, in literaly hundreds of different chemical/physical properties.
There is usually great interdisciplinary involvement in these types of projects. Usually mechanical engineers are involved. And yes, these people really know their stuff. They are plumbing whole new depths of knowledge unknown in traditional corporate development projects. I have been really impressed with the level of understanding these groups have in areas of polymer science where corporations have largely given up --- polymers for implants. I touched on this recently in another post. Very specialized groups are operating under the radar to develop bioresorbable polymers for implants, for example. This project also shows the tremendous potential for additive manufacturing in microfluidics.
By refining topologies and using new fluid technology, Moog's new peak sine drive controller increases available power without increasing controller volume.
Lantronix Inc. has expanded its line of controllers for sensor networks with the release of a rugged controller that improves management of automation systems used in a number of industries, including manufacturing, oil and gas, and chemicals.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
7 
