It looks like a good design, but details are hidden in the photo.
Torx (Star) or Hex (Allen) machine screws fasten the trucks securely to the board with ease. But the torque resistance and strength during use comes from the rubber bushing support and its geometric properties. It's not simply a problem of how to mount, but how it rides.
My nephew from Zurich once brought over 10 samples of these trucks and boards to Canada with the hopes of marketting them. http://www.cloud-9.ch/rollbretter/html-EN/trucks.html
Tensile strength, flex curve, ( or Torque Resistance) weight and life of rubber bushing and also characteristics needed to be also considered in the 3D real-world useage of this part..
Dustin, thanks so much for wading in and giving us your direct "spin" on the thinking and design engineering that went into Tork Trux. I think your points about, 1) not many people seeing their ideas through fruition as a real product; and 2) how some of the emerging Simulation tools allow non-analysts, perhaps even non-engineers, to tap into sophisticated FEA capabilities to help make better products; are two really good takeaways.
I think any engineer will agree that sometimes it's the simplest ideas that end up having the most traction. Good luck with your endeavor and keep us posted on any new developments!
Thanks for the interest in our design. I just wanted to give some clarity to questions that are coming up. First off, if you have not seen the video of how it works, here is a link: http://www.youtube.com/watch?v=NrBgmO1cyzI&feature=feedlik
As a skateboarder and designer, I saw a problem and I solved it. It does appear to be simple at first glance and in this case, that’s what makes it so effective. The innovation and desire to follow through with making a product and bringing it to market is not an easy or inexpensive task. Not many can say they have done this, but we are doing it and turning a dream into reality.
The questions on configuration are expected. Here is the makeup of a skateboard. Complete (skateboard) = Deck (board) + Trucks + Wheels + Grip Tape + Bearings + Hardware. Bushings are also sold separately and to be replaced as part of the truck. Different levels exist in all of the skateboard components and are based on quality. Someone starting out could go to Walmart or Dick’s and get a complete, but its quality is not as good. As you get better and demand better quality, you can either buy value based components or high end components. Tork Trux falls into the high end category from a quality standpoint. From there, personal preference comes into play and is based on things like team riders, color options, weight and how well the product is marketed.
I have put many boards together and watched many people struggle to do this. Everyone does it a little differently and there is not a wrong or right way. I personally prefer to sit upright in a chair, stick the board between my knees, so the board is vertical, and put the trucks on the deck. This way my hands are not needed to balance the deck. In the past, this was a pain to say the least. With our new design, you don’t have to juggle quite as much. Again, there is no wrong way, just personal preference.
We did use the FEA tools in Autodesk Inventor from the Product Design Suite to test its strength. It was something that helped us make sure the part was thick enough to stand up to the forces and moment loads seen in skating. We were very close from our initial design and only needed to use this toward the end of the design. We added material where needed and removed material where we could. I consider myself more of a designer than a full blown engineer. I think that is the point when using these tools. I don’t have to be a full on analyst to make sure the part is strong enough. One specific example is the 2 holes in the base plate. The difference in Safety Factor was minimal and led to us removing unneeded material and getting a lighter truck, which is what all skaters want nowadays.
For those of you that know professional skater Mike Vallely, you will be happy to hear that he liked the idea so much that he joined our Pro Rider Team. We are very excited to have him join. He tested the trucks out personally and stated “Innovative design, plus they ride and grind with the best of them”.
The standard nuts will work with our design as all hardware is 10-32 UNF nuts and screws. The screw lengths do change, but that is yet another user preference. Our design removes 2 extra degrees of freedom by using a flange nut which makes it that much easier to use.
The USPTO did find a handfull of prior art that was close, but we were easily able to discount their objections. I know many people who have tried to get patents and have either been denied or are still in the process of trying to prove their case. We were very fortunate that ours went through after the first rebuttal.
The other thing we are doing is including the hardware and a tool with our trucks. This has not been done before, so we are bringing something else unique to the market as well, besides the design.
Its such a cleaver and simple idea. Making it quicker for skateboarders to setup the a skateboard. I wonder if all the skateboard truck bolts are the same size.
Excellent point, William. You are right that far too often the optimization process is predicated on material reduction as a way to drive overall product costs down. Unfortunately, I don't have any more details on how the analysis drove some of the changes.
Beth, I did not intend to equate more material with stronger, but with more durable. Of course, in any design optimisation effort it is vital to put the material in the right places. And I guess that I had not considered adjusting a skateboard on the fly, as it were. I do shift bike gears a lot, but I only adjust the suspension snubbers and springing occasionally.
Unfortunately, many design teams use the optimization to remove material primarily for cost reduction, with what appears to be no concern about quality reduction. They don't allow for the variations that do occur in low-budget production methods, and the result is a product that breaks when it should not.
It would be interesting to see a few more details of the truck assembly in the picture, perhaps even a discussion of just how the analysis allowed some of the changes.
@William K: I think part of the beauty of the Tork Trux design is allowing riders to change the truck on the fly, hence the need to hold the skateboard vertically. At least that's how the engineer/founder described it. As for your point about more material = stronger: The company enlisted Autodesk Simulation to help create a truck design that could hold up even with less material. I didn't get the sense that the tradeoff was to use less material and have a less stable component.
OK, so this new product is easier to install. Why in the world would I consider holding a skateboard vertical to work on it? The only sensable way to work on the bottom side of a skateboard is to turn it upside down on top of a bench, or two stools, or a large garbage can, if one is desperate enough. Holding it vertical to work on it makes as much sense as putting air in a bicycle tire while sitting on the seat.
However, a new product that has a different, or possibly adjustable, angle to tilt ratio does sound interesting. And the trucks do wear out, although the ones that I have seen fail had more to do with riders hitting the ground with them from relatively higher elevations, with feet closer to the ends, such that board flex could not absorb much of the impact. With that in mind, a question comes up as to exactly why one would want the package that appeared to not be as strong as those with more material.
Looking at the Torx Truck it appears that the wheels and boards can still be customized and easily changed. And from what I can tell these are the two components that are most often changed.
It's a pretty simple design that provides quite a benefit. Great job!
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
Andrew Morris designed a circuit that could detect a stroke victim's groan and convert the sound into a signal so caregivers would know when help was needed.
New disc magnet motors fit into the design trend of stepping up to closed loop performance while maintaining the cost advantage of stepper motor technology.
At the Design News webinar on June 27, learn all about aluminum extrusion: designing the right shape so it costs the least, is simplest to manufacture, and best fits the application's structural requirements.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
