It is really small. The cockpit is actually larger than it looks, much like a Smart Car, but it's really enough to accomodate a pilot, a passenger, and minimal--I mean minimal--gear. As far as Jenn's question around cost, Terrafugia says it hasn't squared away final pricing, but an FAQ on its site says it should be in the vicinity of $250,000.
I had seen pictures and video of the Terrfugia flying car, but until I read this story I never realized how small it is. Maximum takeoff weight with (presumably) two people on board is 1,430 pounds? A Smart Car, by comparison has a curb weight (no one on board) of 1,600 pounds. With a couple people on board, a Smart Car could easily weight 500 pounds more than the Terrafugia Transition. Another comparison: A sub-compact Chevy Cruze weighs around 3,000 pounds. Sheesh, this Terrafugia is really small.
Being able to take off in the middle of a traffic jam would be ideal, but that thought never even occurred to me when reading this story. (That may be a few more years in the future - think the Jetsons!) For the money, if you can afford it, this would be perfect for taking long weekends on Cape Cod or the Florida Keys (depending on where you live). You miss the headache of the traffic and you have a car when you get there. Beth, do they yet know what the cost of the Transition will be? And, like Doug, I am wondering about the fuel economy, though, if you are planning on investing in something like this, that probably isn't in the forefront of your mind.
Beth, you answered my question before I even posted it! Good to know it is not intended as being a primary vehicle and is intended for hobbyist pilots. Interesting story.
I have always wished for a flying car so I would not have to sit in traffic again, but I have to agree with Doug. As cool as it sounds to have a flying car is it something that could be practical?
All good points, Doug, and you beat me to the punch in terms of asking our readers for a reality check. Terrafugia is targeting a very specific audience. Those hobbyist pilots who can't afford (or don't want to incur the cost) of having their own plane and paying for hangar costs along with the expenses associated with renting a car when they reach their destination. This definitely isn't intended to be an Jetson's-like vehicle where you spread your wings and fly off the highway if stuck in a traffic jam. And it's not intended to be a primary vehicle, hence the design choice of smaller wheels and your duly-noted observation that this isn't something you'd want to log miles in on any major freeway.
I wonder if this is one of those things that seem really cool but isn't really practical. I love the idea of driving down the 405, hitting a traffic jam, deploying the wings and flying to the next open stretch of the road. But realistically, you'd have to get to an airport, and then get clearance. The wheels in the photo look too small to be a meaningful highway car. Looks like the fuel economy would be about the same as a monster RV. What are the situations where this would make sense?
Advantech has launched a new series of motion-control I/O modules to meet the increased demands that come with more distributed industrial systems that require control of a growing number of axes and devices.
Using almost 200 light-emitting diodes in the front and back of the new 2014 CTS, Cadillac designers are showing how LEDs can change the character of a vehicle.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
