HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Beth Stackpole
User Rank
Blogger
What does this mean for US manufacturers?
Beth Stackpole   7/12/2011 8:05:54 AM
NO RATINGS
Seems like we've been hearing a lot about new RoHS guidelines as of late--I believe Rob, you wrote something recently about new regulations in India. My question is what does all this mean for engineering and manufacturing groups in the States given that Europe is obviously a key market for them and will these new stronger rules finally pave the way for similar and subsequent regulations here?

Rob Spiegel
User Rank
Blogger
Re: What does this mean for US manufacturers?
Rob Spiegel   7/12/2011 8:42:45 AM
NO RATINGS
If your markets are only in the United States RoHS has no affect. There are medical equipment manufacturers and many defense manufacturers who are not affected by RoHS. Global manufacturers, however, have adopted the RoHS restrictions since they don't know which of the products might end up on the European market.

The biggest change in the RoHS Recast is that some portions of the electronics market are no longer exempt from RoHS restrictions. That includes medical electronics. So, if you're a medical electronics producer with a global market, the RoHS restrictions may be newly applicable.

So far, there is no credible movement in the United States to create a domestic RoHS.

sensor pro
User Rank
Gold
Re: What does this mean for US manufacturers?
sensor pro   7/12/2011 12:21:32 PM
NO RATINGS
This is the only positive news in this whole ROHS issue. We still produce for ourselves withoiut ROHS. I still see too mane peoduction issue which in my opinion dod not justify this ROHS mess. Just last week some connectors melted while in automatic assembly due to high temperature. They all were ROHS, however with a very borderline thermal chanracteristics. Now we need to look for an even more expensive part. We were producing this product to over 10 years without any problem. Now we have burnt connectors and overheated ICs. Also during rework, the ROHS solder smells terrible. I really fail to see any serious benefits. Am I the only one with negative views?

Rob Spiegel
User Rank
Blogger
Re: What does this mean for US manufacturers?
Rob Spiegel   7/12/2011 5:51:23 PM
NO RATINGS
Good points, sensor pro. One of the reasons IPC fought so hard to make sure RoHS changes were based on proven science going forward is because many in the electronics industry criticized the banning of lead in solder, insisting that the EU didn't base the decision on proven science. Many materials experts insist the lead in solder won't leach out in a landfill and they have challenged the EU to prove otherwise, to no avail.

The fact that IPC won on this point during the RoHS Recast is significant.

Dave Palmer
User Rank
Platinum
Re: What does this mean for US manufacturers?
Dave Palmer   7/15/2011 1:12:20 PM
NO RATINGS
I thought the whole point of RoHS was that it considers the product from cradle to grave.  The fact that lead may not leach out of a soldered joint in a landfill doesn't mean that the use of leaded solders is environmentally benign.  In this case, the risks are at the cradle, rather than the grave.  The same goes for chromate conversion coatings.  I don't think a chromated die casting presents much of a threat to the environment - but a a chromate line obviously does.

In my field (marine engines), we still use a lot of RoHS restricted substances, including cadmium, hexavalent chromium, etc.  We are actively looking for good alternatives, and already have a few in place.  The U.S. Department of Defense has actually a lot of helpful work in this regard.

There has been a lot of confusion in the U.S. about exactly what RoHS is, what it applies to, etc.  I'm sure that these changes will only increase the confusion.

Rob Spiegel
User Rank
Blogger
Re: What does this mean for US manufacturers?
Rob Spiegel   7/18/2011 11:18:16 AM
NO RATINGS
That's an excellent point, Dave. Those who oppose RoHS on scientific grounds do indeed discuss its danger (or lack of) in the product's useful life and after disposal. You're correct about the "birth" part where there would be plenty of exposure.



Partner Zone
Latest Analysis
Advertised as the "Most Powerful Tablet Under $100," the Kindle Fire HD 6 was too tempting for the team at iFixit to pass up. Join us to find out if inexpensive means cheap, irreparable, or just down right economical. It's teardown time!
The first photos made with a 3D-printed telescope are here and they're not as fuzzy as you might expect. A team from the University of Sheffield beat NASA to the goal. The photos of the Moon were made with a reflecting telescope that cost the research team 100 to make (about $161 US).
At Medical Design & Manufacturing Midwest, Joe Wascow told Design News how Optimal Design prototyped a machine that captures the wing-beat of a duck.
The increased adoption of wireless technology for mission-critical applications has revved up the global market for dynamic electronic general purpose (GP) test equipment. As the link between cloud networks and devices -- smartphones, tablets, and notebooks -- results in more complex devices under test, the demand for radio frequency test equipment is starting to intensify.
Much of the research on lithium-ion batteries is focused on how to make the batteries charge more quickly and last longer than they currently do, work that would significantly improve the experience of mobile device users, as well EV and hybrid car drivers. Researchers in Singapore have come up with what seems like the best solution so far -- a battery that can recharge itself in mere minutes and has a potential lifespan of 20 years.
More:Blogs|News
Design News Webinar Series
10/7/2014 8:00 a.m. California / 11:00 a.m. New York
9/25/2014 11:00 a.m. California / 2:00 p.m. New York
9/10/2014 11:00 a.m. California / 2:00 p.m. New York
7/23/2014 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Oct 20 - 24, How to Design & Build an Embedded Web Server: An Embedded TCP/IP Tutorial
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: 10/28-10/30 11:00 AM
Sponsored by Stratasys
Next Class: 10/28-10/30 2:00 PM
Sponsored by Gates Corporation
Next Class: 11/11-11/13 2:00 PM
Sponsored by Littelfuse
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service