Rob Spiegel
User Rank
Re: If at first you don't succeed...
Rob Spiegel   7/12/2011 5:45:16 PM
Good points, plasticmaster. This was a particularly strong Sherlock Ohms posting. The detail of the process outlined here reveals the complexity of tracking down problems and the difficulty of determining when you've reached the point of diminishing returns.

User Rank
If at first you don't succeed...
plasticmaster   7/6/2011 12:55:37 PM

"sufficient perseverance must occur to resolve all the root causes" is huge! Too many times processing engineers/design engineers/ etc...stop at almost good enough and fight quality for the rest of the time. I know this because I've done it. You just get tired of fighting it.

And I certainly understand your statement, "just because the problem didn’t totally go away doesn’t mean you didn’t fix a root-cause source of the problem." But...if I have several problems; in this instance, 3 and I fix 2, I have to ask myself, will everyone be ok with that? If not, I've often times had to come with a dollar vs time figure to show that I'm justified in continuing to try to solve the problem OR its not worth it to go on.

User Rank
Carbon Black
Tim   7/6/2011 8:01:54 AM
The conductivity of carbon black can easily be overlooked with material.  It is a relative natural assumptin to figure that plastic is non-conductive.  The addition of any color typically adds a certain amount of carbon that increases its conductivity. 

Partner Zone
Latest Analysis
General Motors is putting an off-road twist on hydrogen fuel cell technology with an imposing new pickup demonstrator called the Chevrolet Colorado ZH2.
Fine powder printing of industry-standard metal and ceramic powders with a grain size of less than 10 microns is now available from industrial 3D printer maker ExOne for its Innovent printer.
At ARM TechCon 2016, CEO Simon Segars will discuss how he sees billions of devices scaling to trillions as IoT applications proliferate. We know it’s happening. How do we prepare?
The term “autopilot” is now at the heart of a growing debate between Tesla Motors Inc. and Germany’s Federal Motor Transport Authority.
A make-your-own Star Wars Sith Lightsaber hilt is heftier and better-looking than most others out there, according to its maker, Sean Charlesworth. You can 3D print it from free source files, and there's even a hardware kit available -- not free -- so you can build one just in time for Halloween.
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Oct 10 - 14, Embedded System Design Techniques™: Getting Started Developing Professional Embedded Software
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7 | 8 | 9 | 10

Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Course September 27-29:
Sponsored by 3M
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Technology Marketplace

Copyright © 2016 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service