Alexander Wolfe
User Rank
When it absolutely has to work
Alexander Wolfe   7/5/2011 9:31:24 AM
Jim makes an important point about the lack of interchangeability between commercial routers and switches and industrial ones. The same thing goes for PCs--perhaps even more so. This article talks about hardening mainly in terms of physical hardening -- resistance to temperature extremes and use of conformal coating as protection. The other aspect is that commerical PCs and network gear have subtle differences from model to model, or even in the same generation. This makes the kind of swapping out that's done in the commercial world much more difficult to get away with in industrial settings, where the gear has to work and be up 100%, without having to constantly send in an IT person to tweak settings and diagnose problems.

TJ McDermott
User Rank
Re: When it absolutely has to work
TJ McDermott   7/9/2011 4:23:32 AM
The switch may be industrial, but as I commented in the Ethernet in the car article, the connectors are NOT.  RJ45 does not belong in industrial settings; it's time for a new robust connector.  M12 Code D might be it.  Maybe M8 for higher connector densities?

Jack Rupert, PE
User Rank
IP Ratings
Jack Rupert, PE   7/10/2011 3:12:01 PM
There are a number of vendors out there that make what they might call industrial strength Ethernet devices.  There is still room for improvement beyond simple temperature and vibration specs.  I would like to see something with an IP-67 rating, for instance, so you don't need to enclose everything.

(TJ, I just added a comment to the auto article as well adressing the plastic tab connector concern).

Partner Zone
Latest Analysis
General Motors is putting an off-road twist on hydrogen fuel cell technology with an imposing new pickup demonstrator called the Chevrolet Colorado ZH2.
Fine powder printing of industry-standard metal and ceramic powders with a grain size of less than 10 microns is now available from industrial 3D printer maker ExOne for its Innovent printer.
At ARM TechCon 2016, CEO Simon Segars will discuss how he sees billions of devices scaling to trillions as IoT applications proliferate. We know it’s happening. How do we prepare?
The term “autopilot” is now at the heart of a growing debate between Tesla Motors Inc. and Germany’s Federal Motor Transport Authority.
A make-your-own Star Wars Sith Lightsaber hilt is heftier and better-looking than most others out there, according to its maker, Sean Charlesworth. You can 3D print it from free source files, and there's even a hardware kit available -- not free -- so you can build one just in time for Halloween.
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Oct 10 - 14, Embedded System Design Techniques™: Getting Started Developing Professional Embedded Software
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7 | 8 | 9 | 10

Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Course September 27-29:
Sponsored by 3M
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Technology Marketplace

Copyright © 2016 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service