View Comments: Newest First|Oldest First|Threaded View
Jack Rupert, PE
User Rank
IP Ratings
Jack Rupert, PE   7/10/2011 3:12:01 PM
There are a number of vendors out there that make what they might call industrial strength Ethernet devices.  There is still room for improvement beyond simple temperature and vibration specs.  I would like to see something with an IP-67 rating, for instance, so you don't need to enclose everything.

(TJ, I just added a comment to the auto article as well adressing the plastic tab connector concern).

TJ McDermott
User Rank
Re: When it absolutely has to work
TJ McDermott   7/9/2011 4:23:32 AM
The switch may be industrial, but as I commented in the Ethernet in the car article, the connectors are NOT.  RJ45 does not belong in industrial settings; it's time for a new robust connector.  M12 Code D might be it.  Maybe M8 for higher connector densities?

Alexander Wolfe
User Rank
When it absolutely has to work
Alexander Wolfe   7/5/2011 9:31:24 AM
Jim makes an important point about the lack of interchangeability between commercial routers and switches and industrial ones. The same thing goes for PCs--perhaps even more so. This article talks about hardening mainly in terms of physical hardening -- resistance to temperature extremes and use of conformal coating as protection. The other aspect is that commerical PCs and network gear have subtle differences from model to model, or even in the same generation. This makes the kind of swapping out that's done in the commercial world much more difficult to get away with in industrial settings, where the gear has to work and be up 100%, without having to constantly send in an IT person to tweak settings and diagnose problems.

Partner Zone
Latest Analysis
Digital design tools and 3D printing can be used to innovate new products and accelerate the development and commercialization cycle.
The ways companies and their outside product development partners work together and divvy up success are evolving radically. Here's what you need to know no matter if you are an engineer or executive.
One of the biggest walls in embedded software development is the integration of low-level drivers with higher-level middleware and application code, but silicon vendors are stepping up to bring it down.
Honeywell and NASA's FMA Live! Forces of Nature show uses hip-hop to teach physics lessons and is currently on its Fall 2015 tour in the Midwest.
Using 3D-printing to integrate electronics is an enthralling idea, but there's a long road ahead to commercialization.
Design News Webinar Series
10/1/2015 11:00 a.m. California / 2:00 p.m. New York
9/10/2015 11:00 a.m. California / 2:00 p.m. New York
8/13/2015 11:00 a.m. California / 2:00 p.m. New York
6/25/2015 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Oct 5 - 9, Standards for the Internet of Things (IoT)
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7

Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2015 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service