View Comments: Threaded|Newest First|Oldest First
User Rank
Sweat Fittings
Tim   6/23/2011 7:56:08 PM
These fittings seem to be a lifesaver.  Sweating pipes that have moisture in them is one difficult task.  You can jam a piece of bread in the pipe to block the water, but it doesn't always work.  The Sharkbite fasteners seem to help where conventional or PEX fittings fail.

User Rank
deeaks   12/5/2012 3:31:58 PM
In my expeirence a few years back as a plumber's assistant, these are GREAT for just making a couple of connections but you wouldn't want to plumb your entire house with them due to the price.  Particularly if you're connecting copper to pex or PVC, but also handy if you are re-routing copper pipes or connecting to existing copper.  As most people know, as you solder the pipe, you must always leave one end open so that the expanding air can escape from inside the pipe.  This presents a problem sometime when re-connecting new plumbing to the old piping unless you have a valve you can leave open or something that allows you to leave that escape route for the air as you solder.  

Even though the existing plumbing may be turned off, dry inside, and very well cleaned, if there is no place for air to escape, your solder will "blow out" as the air heats up inside the pipe and after the water is restored, you will end up with a leak (which is now MUCH harder to fix because your pipe is full of water again.

Anyway, these fittings are awesome for such an application, plumb up your new system, sweat all your joints, then push the sharkbite fitting onto your old plumbing and then your new plumbing and presto!

Partner Zone
Latest Analysis
General Motors is putting an off-road twist on hydrogen fuel cell technology with an imposing new pickup demonstrator called the Chevrolet Colorado ZH2.
Fine powder printing of industry-standard metal and ceramic powders with a grain size of less than 10 microns is now available from industrial 3D printer maker ExOne for its Innovent printer.
At ARM TechCon 2016, CEO Simon Segars will discuss how he sees billions of devices scaling to trillions as IoT applications proliferate. We know it’s happening. How do we prepare?
The term “autopilot” is now at the heart of a growing debate between Tesla Motors Inc. and Germany’s Federal Motor Transport Authority.
A make-your-own Star Wars Sith Lightsaber hilt is heftier and better-looking than most others out there, according to its maker, Sean Charlesworth. You can 3D print it from free source files, and there's even a hardware kit available -- not free -- so you can build one just in time for Halloween.
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Oct 10 - 14, Embedded System Design Techniques™: Getting Started Developing Professional Embedded Software
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7 | 8 | 9 | 10

Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Course September 27-29:
Sponsored by 3M
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Technology Marketplace

Copyright © 2016 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service