HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Critic
User Rank
Platinum
Auto Body Drain Holes
Critic   7/22/2011 5:36:02 PM
NO RATINGS
I think it's safe to say that all production cars have body drain holes that require maintenance.  Typically the holes should be cleaned every 6 - 12 months, maybe even more frequently, depending on the amount of detritis that falls on the car.  Owner manual maintenance schedules that I have seen specify this cleaning operation and interval.

What happens if you don't clean the drain holes?  Flooding as described in this article, or corrosion of body panels such as door skins, fenders, and floor.  Carpeting and inner door panels can also be affected.  My F-150 often has a swimming pool in the bed (sometimes referred to as a redneck jacuzzi) after a rain storm because the bed drain holes easily clog.  Eventually the holes will rust, enlarging the openings so the bed drains more easily.

Rain drainage is not the only source or water problems with cars.  A 2000 Mustang I own had a design defect where condensate from the A/C evaporator dripped onto the exhaust pipe near the catalytic converter.  This eventually causes the pipe to crack and leak exhaust.  Ford's documented fix is to weld up the crack using a particular welding process and materials, which most repair shops would not have.  The pipe is stainless steel, so ordinary welding processes cannot be used with any degree of lasting success.  A new aftermarket catalytic converter assembly costs about $600.

Lauren Muskett
User Rank
Platinum
Flawed Gutter
Lauren Muskett   6/27/2011 10:36:40 AM
NO RATINGS
My windshield gutter is slightly flawed as well. My 2008 Nissan windshield gutter was not installed as one piece and was instead installed as one long piece with two side corners. For some reason the one side corner has fell off so pollen has been collecting there and the rain water flows under the hood. I admit I feel lucky after reading this because I much rather clean out the gutter then have to deal with hot water leaking on my feet.

Rob Spiegel
User Rank
Blogger
Why a Trough at All?
Rob Spiegel   6/24/2011 11:27:16 AM
NO RATINGS
I don't understand why this design was needed in the first place.

TJ McDermott
User Rank
Blogger
Hot water
TJ McDermott   6/23/2011 10:12:38 PM
NO RATINGS
Hot-tubbing at 60mph!  It's a feature, not a flaw!

Tim
User Rank
Platinum
Cars and water
Tim   6/23/2011 7:40:25 PM
NO RATINGS
I have a major aversion to water and vehicles.  My 02 Ford F150 has a problem with water leaking through the bottom of the windshield seal and into the power control module effectively shorting out a few of the relays.  The only solution is to pull the windshield and reseal.  Made by Monkeys



Partner Zone
Latest Analysis
Take a look at the top 20 US undergraduate engineering programs. Then tell us -- did your school make the cut?
Producing high-quality end-production metal parts with additive manufacturing for applications like aerospace and medical requires very tightly controlled processes and materials. New standards and guidelines for machines and processes, materials, and printed parts are underway from bodies such as ASTM International.
Engineers at the University of San Diego’s Jacobs School of Engineering have designed biobatteries on commercial tattoo paper, with an anode and cathode screen-printed on and modified to harvest energy from lactate in a person’s sweat.
A Silicon Valley company has made the biggest splash yet in the high-performance end of the electric car market, announcing an EV that zips from 0 to 60 mph in 3.4 seconds and costs $529,000.
The biggest robot swarm to date is made of 1,000 Kilobots, which can follow simple rules to autonomously assemble into predetermined shapes. Hardware and software are open-source.
More:Blogs|News
Design News Webinar Series
7/23/2014 11:00 a.m. California / 2:00 p.m. New York
7/17/2014 11:00 a.m. California / 2:00 p.m. New York
6/25/2014 11:00 a.m. California / 2:00 p.m. New York
5/13/2014 10:00 a.m. California / 1:00 p.m. New York / 6:00 p.m. London
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Sep 8 - 12, Get Ready for the New Internet: IPv6
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Next Class: September 30 - October 2
Sponsored by Altera
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2014 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service