Most icemakers have a heater that melts the interface between the ice that has formed in the tray and the tray. If the ice tray fails to dump it is usually due to failure of the heater. The broken plastic tab was probably due to the failure of the ice to come loose from the tray. In the end the icemaker would have to be replaced but there is no guarantee that the heater will fail again in 2 years. I have had icemakers to last 20 years and one that failed (due to a bad heater) in a year.
In Austeralia, a fault like that is covered under warranty. CONSUMER AFFAIRS states that a product must be suitable for the purpose it is intended and must last a reasonable length of time. For a TV it is 3 years and a fridge is 5-7 years.
What is a counter-top fridge? There are small refrigerators that fit on a counter, but typically these don't have icemakers or are of the store display variety. Neither seems applicable to this article. Some consumers have counter-DEPTH refrigerators. I am interested in knowing the type of refrigerator to determine the economic practicality of continuing to spend money on new ice makers.
Ice makers, yes, but don't forget about the cars, Rob. Seems automakers are getting a bit lazy when it comes to designing the latest models in recent years. From CD players that eat CDs simply because you need to change the battery, to impossible to get to oil pans, seems readers may want to stick with the model they bought in '92 rather than upgrade.
Of all the Made for Monkeys submissions, one of the most common involves ice makers that fail. The results are often comical. They typically involve ice and water on the floor or unintended ice sculptures in the freezer.
In order to keep in line with safety protocols, industrial networks need to be filtered in a semantic way so that only information related to diagnostics is flowing back to the vendor and that any communications that could be used for remote machine operations are suppressed.
Advanced visualization can depict an entire plant in motion, while also detailing an individual workstation. Individual products can be rendered different for each discipline involved — marketing, engineering, or suppliers.
While people may talk about the procurement process, the procurement discipline actually encompasses a number of different processes. They include spend analysis, supplier relationship management, and contract management, just to name a few.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.