Most icemakers have a heater that melts the interface between the ice that has formed in the tray and the tray. If the ice tray fails to dump it is usually due to failure of the heater. The broken plastic tab was probably due to the failure of the ice to come loose from the tray. In the end the icemaker would have to be replaced but there is no guarantee that the heater will fail again in 2 years. I have had icemakers to last 20 years and one that failed (due to a bad heater) in a year.
In Austeralia, a fault like that is covered under warranty. CONSUMER AFFAIRS states that a product must be suitable for the purpose it is intended and must last a reasonable length of time. For a TV it is 3 years and a fridge is 5-7 years.
What is a counter-top fridge? There are small refrigerators that fit on a counter, but typically these don't have icemakers or are of the store display variety. Neither seems applicable to this article. Some consumers have counter-DEPTH refrigerators. I am interested in knowing the type of refrigerator to determine the economic practicality of continuing to spend money on new ice makers.
Ice makers, yes, but don't forget about the cars, Rob. Seems automakers are getting a bit lazy when it comes to designing the latest models in recent years. From CD players that eat CDs simply because you need to change the battery, to impossible to get to oil pans, seems readers may want to stick with the model they bought in '92 rather than upgrade.
Of all the Made for Monkeys submissions, one of the most common involves ice makers that fail. The results are often comical. They typically involve ice and water on the floor or unintended ice sculptures in the freezer.
We looked at a number of sources to determine this year's greenest cars, from KBB to automotive trade magazines to environmental organizations. These 14 cars emerged as being great at either stretching fuel or reducing carbon footprint.
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is