Cellulose Could Replace Short Glass Fibers in Composites
10/15/2012
A new thermoplastic composite uses engineered cellulose fiber from trees, such as these logs in Kuopio, Finland, instead of the short glass fibers usually used for reinforcement. Applications include automotive parts and industrial components. (Source: Wikimedia Commons/Okko Pyykkö)
Ann, this looks like a great use of material. Glass fibers do tend to eat machinery and molds in normal application, so a less abrasive fiber would be great. Has there been any look at using these fibers in nylon applications? Also, is the cost of the additive similar to that of the glass fibers?
Tim, no info on fiber cost was given, but considering Weyerhauser's main business--wood pulp--I'd guess it's likely to be less than glass. Re "use in nylon applications," what exactly do you mean?
tekochip, that's a good point about flammability. The fact that Ford is working with Weyerhaeuser to develop materials for car interiors, plus the fact that these are engineered, not just natural, fibers, makes me think that potential problem may have already been addressed/compensated for. Here's a link to the MSDS for THRIVE, which gives a rating of 1 (0-4 scale): www.weyerhaeuser.com/pdfs/msds/501.pdf
Ann, ne thing I like about this product is that it is produced by materials we have naturally here in the US. With materials such as coconut, grow in a fairly narrow band of the planet. This tends to cause overharvesting in areas with low environmental controls.
Lou, I understand your POV on US materials sources. Actually Weyerhaeuser owns forests in various parts of the world and expects to source cellulose from them as needed. Forests that can be harvested for wood products in northern temperate zones (there aren't many in southern ones) are no longer as common as you might think, including in the US.
Ann, really ejoyed the article. Whenever we can repurpose natural and renewable resources as replacements for energy intensive manufactured goods it moves us in the right direction. Thanks.
Hmm, 40% shorter mold times, comparable weight and material properties, less tooling damage during manufacturing, and blendability with a variety of plastic base material. What's not to like about the new THRIVE?
I agree with the flammability issue and the possible overharvesting of dwindling resources. Still, it seems to be a good idea.
TJ, since this is a composite, the fibers are surrounded by a polymer matrix (polypropylene at this point in time), so I doubt if water absorption is a problem.
Nice article, Ann. This sounds positive all the way around. With cycle times 40 percent shorter, there are probably some cost savings. Does the material itself also offer some cost savings.
Rob, we didn't get info on the fiber/glass cost differential, but considering that Weyerhauser's main business is wood pulp and wood products, I'd guess it's probably cheaper than glass.
Rob, I also figure that paper is a lot cheaper than glass, so these have got to be cheaper as fibers, plus they start out as fibers, which glass does not.
Sounds like a waste product they are trying to find a use for. From the specs it's rreally just a filler pounded into dust so fine it won't show on the surface.
It's flamability is higher because it's so fine but the resin is more flamable so the point is moot. Wood actually is far less flamable than synthetic ones. The navy went to all polyster uniforms until they went up in flames regretfully with sailors in them so they switched back to cotton blends I believe.
That's an interesting story about polyester vs cotton and the flammability of natural vs synthetic materials. I remember as a kid in the 50s-60s hearing about the flammability of synthetic clothing material, which, I believe, is when many of the standards were developed for clothing material flammability.
Just as bad is it melting on the skin then when you slap it to put it out it sticks to the hand and spreads sticking to the skin where it was buring/melting. Not a good way to go.
Living in Fla pure polyster is just too hot and uncomfortable in the summer. Though I really like rayon which is about the most comfortable cloth usually, slightly better than cotton and doesn't seem as flamable as polyester or nylon. A good 65% cotton, 35% polyster works fairly well and cuts the problems of pure cotton or pure poly.
Jerry, that poly-cotton mix sounds like what I liked best for hiking clothes in my backpacking days. Cotton was supposed to be a no-no among backpacking enthusiasts because it takes so long to dry, either when wearing it, or when washing it at the campsite. But I found 100% polyester and other non-natural clothing to be too hot and sticky for comfort, no matter how it was made.
Andrew Morris designed a circuit that could detect a stroke victim's groan and convert the sound into a signal so caregivers would know when help was needed.
New disc magnet motors fit into the design trend of stepping up to closed loop performance while maintaining the cost advantage of stepper motor technology.
At the Design News webinar on June 27, learn all about aluminum extrusion: designing the right shape so it costs the least, is simplest to manufacture, and best fits the application's structural requirements.
On April 21, NASA launched a novel project, putting into orbit three satellites that employ an off-the-shelf commercial smartphone as the control system.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
