Hoof Beats? Really? At 15 MPH or less? If Mercedes-Benz can make sensors that allow a vehicle to stop short of a vehicle stopped or to maintain distance during cruising, why can't the same sensor array be used to flash headlights or the audible double honk warning prior to the vehicle stopping on it's own. For that matter, how about day/night vision that compares digitally comparative movement from outside of the planned vehicle path based upon steering position. Making noise to prevent accidents is like putting playing cards into the spokes of my bicycle, it might keep those with hearing out of the way, but what about grandma or the late night pub crawler?
I can certainly understand the need for this. I have an issue with hearing and EVs, depending upon the model, are almost "nonexistant" when unseen. In the work I do on a daily basis; i.e. gas combustion, its'a know fact that natural gas is oderless so, an oderant is added for detection. Very same principal as Charles has mentioned. The automakers are definitely following the logical path, even if my mandate.
Believe it or not, oldpartsnrust, there was a movie called "The Dilemma" with Vince Vaughn where the main characters do the very thing you've described. They develop a way to make an electric car sound exactly like an old-fashioned muscle car.
The engineers and inventors of the post WWII period turned their attention to advancements in electronics, communication, and entertainment. Breakthrough inventions range from LEGOs and computer gaming to the integrated circuit and Ethernet -- a range of advancements that have little in common except they changed our lives.
The age of touch could soon come to an end. From smartphones and smartwatches, to home devices, to in-car infotainment systems, touch is no longer the primary user interface. Technology market leaders are driving a migration from touch to voice as a user interface.
Soft starter technology has become a way to mitigate startup stressors by moderating a motor’s voltage supply during the machine start-up phase, slowly ramping it up and effectively adjusting the machine’s load behavior to protect mechanical components.
A new report from the National Institute of Standards and Technology (NIST) makes a start on developing control schemes, process measurements, and modeling and simulation methods for powder bed fusion additive manufacturing.
If you’re developing a product with lots of sensors and no access to the power grid, then you’ll want to take note of a Design News Continuing Education Center class, “Designing Low Power Systems Using Battery and Energy Harvesting Energy Sources."
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.