Ford Motor Co. is raising the stakes in rapid prototyping, making testable prototype metal parts ranging from brake rotors to transmission cases with three-dimensional (3D) printers.
Using technologies such as selective laser sintering, stereolithography, and 3D sandcasting, Ford engineers say they're able to build metal parts with the same material characteristics as those that are injection molded, and then employ them as "surrogate" parts in test vehicles prior to production. Doing so enables them to eliminate the time-consuming step of building an injection molding tool, thus cutting weeks from the process.
"With these technologies, we just build a part directly from a CAD file," Harold Sears, rapid manufacturing technology specialist for Ford, told Design News. "There's no tooling needed."
Ford engineers send CAD files between facilities, then build prototypes at workstations using MakerBot Thing-O-Matic 3D printers. (Source: Ford Motor Co.)
To be sure, manufacturers have used rapid prototyping techniques for more than a decade, but Ford is said to be unusual in its use of 3D printing for metal parts in test engines, transmissions, and brakes.
Prior to the advent of such techniques, manufacturers typically machined an injection mold tool before building a metal part. Doing so took time -- one to two weeks for simple tools and 10 to 12 weeks for more complex ones. By eliminating the need for those tools, they can now turn around a testable metal part in days or even hours. "In the past, we might have only been making one or two parts, but we still had to make an injection mold tool for them," Sears told us. "But with processes like laser sintering, we can now build really testable and durable parts without the tooling."
Ford has invested in what may be one of the industry's biggest rapid prototyping efforts. Three facilities near its Dearborn, Mich., headquarters contain selective laser sintering and stereolithography equipment, while another is dedicated to rapid sandcasting. The sandcasting facility enables printing of sand molds that can be used to create metal parts with the same material properties as production parts.
The giant automaker has employed those techniques in rotor supports, transmission cases, damper housings, and end covers for its C-Max and Fusion hybrids. Four-cylinder ECOBoost engines, Ford Explorer brake rotors, and F-150 exhaust manifolds have also been built with the technology.
Ford's expanded use of 3D printing has also swept across its research and development facilities. Engineers often send CAD files back and forth between
the company's Silicon Valley Lab and its Dearborn facilities, then use the files to build physical prototype parts on MakerBot Thing-O-Matic 3D printers. By doing so, they can quickly tweak the designs of shift knobs, gauges, display modules, and other plastic parts.
"Now, at the press of a button, you can have the product or component at your fingertips," said K. Venkatesh Prasad, senior technical leader for Ford, in a company press release. "With a model in one hand, you can then input your changes back into the computer model."
Ford engineers believe the trend toward rapid prototyping is still growing fast. "We're going to see more development of these materials," Sears predicts. "As the processes become more robust, they're going to allow engineers to do even more with these parts than they do today."
Well, the article could've gone into a bit more detail, but I think 'selective laser sintering' was mentioned? I've seen a process like that years back where a metal powder is sintered into a 3D shape using a high-powered laser. Then the 3D part is cleaned of loose powder, cured in an oven and then dipped into molten bronze. Capillary action draws the bronze throughout the entire part. The finished piece is then just as strong as traditional cast bronze. Ever since, I've thought about making boat propellors this way.
I understand the printer shown is just what's used to share plastic prototypes, but without first showing us some of that laser sintering machinery, it's a bit disconcerting at first! I'm just wondering when the term 'rapid prototyping' becomes an outdated expression, where 'rapid manufacturing' is the new buzz and we can all talk about the merits of 'instant prototyping'! By the way, I don't recall the name, but I did see a company specilaizing in 3D printing plastic cores to be used for sand casting. The plastic was designed to burn out just like a 'lost wax' technique, and was intended for applications including engine blocks.
It's true that media coverage of 3D printing has exploded--but so has the industry, along with real-world applications. It may be so hard to believe because it sounds so much like sci-fi. But Contour Crafting's house-building technology is not smoke. NASA is investigating it, and other similar technologies, for use on the Moon: http://www.designnews.com/author.asp?section_id=1392&doc_id=250614 Meanwhile, several other 3D printing and related technologies are being developed for making buildings--not prototypes, not molds--some of them quite large: http://www.ubmfuturecities.com/author.asp?section_id=262&doc_id=523906
Printers and print-materials are getting cheaper. To the point where I am ready to drop the cash one a setup at a moment's notice. I am waiting for that moment, where it becomes a no-brainer on what to get. So far, all the options are not exactly blowing my hair back.
The article mixes some good information and news of Ford's investment/commitment along with similar hype to other articles over the last year or two.
It is unclear from the way things are stated, but it sounds like they are making 3D models, using them to make sand molds, then making 1 part per mold. That is somewhat novel, but far away from printing functional metal parts in 3D.
We used a similar process over a decade ago to make SLAs then use them to make silicone molds where plastic parts, which were functional enough for disk drive covers, bezels, etc., were cast. It is a smart innovation to take that process into making molds for sand casting.
There are limitations, of course; many parts in cars are made from cast metal, but many are not.
There are actual parts being made for the Air bus and the F35. for the Air bus TI brackets are being built that weigh about 65% of a machined TI bracket becaus you put the metal just where it needs to be and as these are low volume parts it save a tremendous amout of cost for stocking, and manufacturing spares.
The F35 has a very complex airduct/control valve being made tht is reducing the paper required compared for tracking the process QC, etc to a fabricated part from 1-1/2 inches thick to one page basiclly
for a good seminar on this there is a seminar on Laser additive manufacturing in a few weeks put on by the Laser Institute of America that has the latest info available in the world.
Is it an explosion or just more mainstream awareness? With so many stories on NPR, BBC and even morning news shows, you'd think 3D printing was the answer to all of the world's problems.
According to yahoo news, a 3D printer can build a house in 20hrs. It's all a little overblown right now. Once the initial "wow" factor wears off, I think we'll see actual, long-lasting applications.
As energy efficiency becomes more and more a concern for makers of electronics devices, researchers are coming up with new ways to harvest energy from sound vibration, footsteps, and even electromagnetic fields in the air.
The government wants to study your brain, and DARPA wants to use similar information to give robots true autonomy beyond any artificial intelligence developed to date. Sound like science fiction? It's not.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
8 
