Wake Forest University scientists have devised a shatterproof, white light, flicker-free lighting device based on field-induced polymer electroluminescent (FIPEL) technology. (Source: Wake Forest University)
I figured as much. I assumed I was seeing the 60hz flicker from the wall. I suppose it would be cheaper and last longer to not filter the signal. I imagine if the cap burst, the whole strand would be shot. Similar to the only series bulbs. One goes, the circuit is cut. I am sure a line conditioner is sold separate. In other words, a CAP in a box for $29.99.
A cd/m^2 is also known as a nit, which is also 1 lumen per meter squared per steridian. There are pi steridians in a hemisphere, which is the total solid angle of a lambertian flat surface source.
A typical power led is about 1 mm on a side, or 1e-6 meters squared, and in excess of 100 lumens at around 1 watt drive. This is 3e7 nits So one led with 1mm^2 area = 100 lumens (or more )
A reference I have says a candle flame is 0.01 cd/mm^2 which is 1E4 cd/m^2.
So this would suggest 20 cd/m^2 is much dimmer than a candle flame, and to get 100 lumens total even, the area would need to be more than a meter squared.
Hi Cabe, The LED Christmas light flickering is caused by using a simple DC power supply rectifier circuit. If there is no output capacitor to filter the ripple, the LEDs respond by flickering.
TommyH, I think you meant candela, not candle power. The latter is considered an obsolete unit of measurement. Today, this is measured via luminance or luminous intensity. Wikipedia has a good article on luminance.
It looks like this may possibly be a breakthrough, or possibly not. I remeber the electro-luminescent panels and devices that we had in the 1960's and wonder if it is a new implemantation of that technology. Those devices did provide a nice grale-free light, but not that much of it. I have no ideas about the relative efficiency, or lumens per watt. But the devices were very long-lived. I think that they were sort of expensive, as well. I have a couple of the inverter packages that were used by Chrysler for the EL instrument panels back in 1965, I think. They put out a very spikey waveform with a peak of almost 200V.
It would be interesting to find out about the performance of an actual prototype, as opposed to that of a single research sample device. That is the sort of information that would help to understand where this technology lies, on the development toward commercialization curve.
I'm betting the reason ARS Technica didn't get "performance numbers" is because they asked the wrong question. So far, AFAIK, this is a number of prototype devices, not a single actual bulb with wattage specs, which is what will be produced after commercialization efforts are completed. The details that are available can be found in the (free) journal article, which we provide a link to. They include varying luminance intensities.
There seems to be some confusion here regarding the difference between prototypes and working products, and the amount of time it requires to move from the first to the second. I made an earlier comment on this subject: "Maybe we're all used to Silicon Valley-style announcements of new technology for sale right now in high volumes, and not of the long R&D cycle behind that technology. In materials technology, especially energy-related, development can take a long time...The main researcher has had a single working device for a long time--but not a bulb, and, presumably, a very expensive device, and, I'd guess, one he's been tinkering with as a prototype."
It is interesting that rather than talk about candle power, the devices are described as less harsh than LED or florescent lights. A candle meets those criteria as well as a match, a glowing ember etc. Can anyone put this into terms of candle power per watt or some other real world measurement?
For 3D printing to make the jump from rapid prototyping to manufacturing, engineers will need to find easier ways to move products from their CAD screens to their printers.
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
2 
