Rockwell Offers Integrated Mid-Range EtherNet/IP Motion Control
The combined Kinetix 5500 servo drive, VP low-inertia servo motor, and single-cable technology from Rockwell Automation simplifies wiring for motion-control systems of midrange machines. The integrated product should reduce design time and lower the overall application footprint for equipment engineers and machine builders, the company said. (Source: Rockwell Automation)
Great point, TJ. Certainly engineered cables need to be designed carefully and tested extensively at longer distances. If it isn't right, I'm sure Rockwell will find out about it. But that's still a legitimate concern for system engineers.
The important part of single cable servo hardware is the cable. Rockwell will need to impress experienced engineers that they've designed the cable so that the feedback signals are immune to the noisy power signals.
Obviously added EtherNet/IP to their mid-range motion control offering is the main story, but the single cable combining power and feedback might be the most unique benefit. Also covers both servos and induction motors with single platform.
Yes, it seems to be the case, you're right. Putting more functionality in one device reduces the need for multiple components, as you point out. And Ethernet/IP is becoming more prevalent in device design as it seems that everything is required to be connected to a network these days.
Elizabeth, it seems that the trend is to increase integration of these types of devices. Many in the past were made up of separate components. The use of EtherNet/IP also eases integration and cuts costs. Interesting application.
Engineers at Fuel Cell Energy have found a way to take advantage of a side reaction, unique to their carbonate fuel cell that has nothing to do with energy production, as a potential, cost-effective solution to capturing carbon from fossil fuel power plants.
To get to a trillion sensors in the IoT that we all look forward to, there are many challenges to commercialization that still remain, including interoperability, the lack of standards, and the issue of security, to name a few.
This is part one of an article discussing the University of Washington’s nationally ranked FSAE electric car (eCar) and combustible car (cCar). Stay tuned for part two, tomorrow, which will discuss the four unique PCBs used in both the eCar and cCars.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.