If you start your car two or three times a day, prepare for a shock. Over the next decade, that figure is likely to rise by a factor of 10. Soon your car's engine will automatically shut down at traffic lights and stop signs. It will turn off during heavy rush-hour driving. It may even shut down when you pull your foot off the accelerator and coast, possibly at speeds of up to 75mph. Experts say the so-called start-stop wave is coming, and the auto industry is bracing for its arrival.
"It's going to start happening in 2012," says Doug Patton, senior vice president of engineering for Denso International America, an automotive supplier introducing a family of starters. "And it's going to ramp up fast. The start-stop change will affect a large percentage of the market over the next three years."
Click the image below to start the slideshow.
In addition to a heavy-duty starter, start-stop systems require such components as enhanced engine control, battery management, DC/DC converters, and more robust crankshaft sensors.
(Source: Robert Bosch LLC)
US automakers have begun unveiling a new breed of start-stop-equipped vehicles. Ford, Chevy, Buick, Kia, and BMW will roll out the technology early in 2012. Their vehicles will join a handful of models from Fiat, Volvo, and Alfa Romeo that already have it. Moreover, start-stop has also taken hold in Europe, where the percentage of new vehicles carrying the technology has risen from about 5 percent in 2008 to more than 20 percent today.
The reason for this seemingly sudden phenomenon is obvious. When your engine is turned off, it doesn't burn gasoline. suppliers say brief shutdowns can boost fuel efficiency by 3 to 10 percent. That figure will rise even higher if automakers are willing to shut off the engine while the car is coasting.
Chances are that the technology will be adopted quickly, even if consumers don't demand it. New corporate average fuel economy (CAFÉ) regulations in the US call for cars and light-duty trucks to reach 54.5mpg by 2025, adding a sense of urgency to start-stop's uptake.
"Eventually, we'll see 100 percent of new vehicles offering start-stop," Patton says. "It will probably happen over the next 10 to 15 years."
Since this was first posted, I have learned that at least one Canadian city is making it illegal to idle for more than 60 seconds! Stated concern: polution at stop lights during the winter months (inversion layer during winter?)
Ouch!..
If this comes even close to being enforced (70%+), a lot of older cars are going to see a lot of their local mechanics! Older cars are simply not designed for this level of abuse.
time and tide wait for no one......
I was kinda hoping to keep my older sports car for alot longer.. .(sigh)
I would assume pure marketing hype. They want the consumer to think they're getting a real hybrid with all the fuel saving advantages at a lower cost point.
Federal-Mogul has released a new line of engine bearings that function well under frequent stop-start cycles. It is called Irox and comes in versions for both diesel and gas engines. I see it is used in the new (2014) Corvette v8 engine, and most likely is being used more widely. Other technologies exist for cylinder walls, valve guides, piston rings, etc., which allow long engine durability under start-stop conditions.
Providing oil pressure to assure adequate lubrication is in place at startup would indeed require additional hardware, but the devices that would do the job are old technology, fully mature and already used for other applications for many years. Besides that, most of the time the restart would be soon enough that the oil would not have much time to drain away.
For the very largest improvements there will need to be driver control rather than computer control, and those savings will be more in the 40% to 60% range, at least for city-type driving. But only at the hands of the more skilled and attentive drivers. On the other side, running the air conditioner would not only kill the mileage improvement, it would also probably increase the needed battery size by a factor of at least ten.
A study was done years ago that said about 80% of engine wear happens in the first few seconds after starting because of lack of oil pressure. What is being done about this? Haven't heard. Maybe yet another motor running the oil pump?
I keep cars for years & now they are getting even more complex, I don't want disposable cars like all other current day appliances.
I will never buy a S/S car. The percentage of fuel savings doesn't come close to what the cost of fixing it, or the wear it will see.
Just give me that 50 mpg diesel power as in Europe.
Any hybrid that can't keep the engine and therefore A/C running at a light won't sell in the southwest. Prius (and I assume Honda) keep the engine running so the A/C works. My Prius starts up on battery, the shift to engine is imperceptable and reliable. If the start-stop is properly integrated into the engine and controls, it should be reliable. And on the subject of an all battery electric, it is totally illogical and a waste of ink (or bandwidth) to discuss.
I can understand why you might want the reliable, easy to fix catalytic converter free gas guzzler. But you don't get to choose because that car drives up gas prices and pollutes the air for all of us. I am old enough to remember LA summers in the years before emission controls. On some days you could hardly breathe. And if you think $4 a gallon is bad, try $6. Or $20.
An equally serious problem is that prior to the "54.5 mpg by 2025" agreement, our 35MPG standard put us at risk of losing all auto sales to China, whose standards will be 42.2 MPG (18km/L) as iof 2014. It's the same for low emissions in Europe. Meet the rules or don't sell. 50 years ago US automakers could do whatever they wanted. No more. If we can't sell internationaly our automakers will fail. Depending on who you believe, the US auto industry is responsible for 5-14 million jobs, or 4-10% of total US employment. You think unemployment is bad now? Try it at 15% and watch the pundits fly.
Emissions controls, hybrids, start-stop, and plug-in electrics are all here to stay. But they don't need to be half-baked like your friend's truck, that was using the starter motor in ways it was not designed to be used. Soon they will get it right: someting like a brushless motor with the magnets built into flywheel. No brushes, no solenoids or mechanics to fail. Either way, like it or not, it's coming.
When my gun safe was delivered (yes, I am clinging, bitterly, as BHO quipped), the truck driver was complaining that his company, a large national firm, had installed Stop-Start technology on all their diesel trucks, and that they were suffering a high frequency of starter failures as a result. His disdain for the "improvement" was palpable. This is real world feedback.
I'm glad some of you choose to reap the benefits of this technology, more power to you, but I will gladly pay for the extra fuel needed to keep my engine idling at red light, etc. The extra complexity and cost that all these lovely and oh-so-helpful systems inherently bring to the table, from ABS brakes to tire pressure monitoring to air bags to catalytic converters, is always minimized, until it is time for repairs, as someone mentioned. And usually out of warranty. Can we please let the market decide whom wants this stuff, and let others buy the more basic alternative? That would be a true example of "diversity" and "tolerance" that I could get behind.
For 3D printing to make the jump from rapid prototyping to manufacturing, engineers will need to find easier ways to move products from their CAD screens to their printers.
Gigabit and PoE are two networking technologies moving ahead in tandem as industrial users power remote Ethernet devices such as IP security cameras at 1,000 Mbps over existing CAT5 cable.
New versions of BASF's Ecovio line are both compostable and designed for either injection molding or thermoforming. These combinations are becoming more common for the single-use bioplastics used in food service and food packaging applications, but are still not widely available.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
2 
