By focusing their attention on patterns created by flickering lights on a PC screen, which are associated with specific actions, users can control which actions they want a robot to perform, where the robot moves, and how it interacts with its environment. (Source: CNRS-AIST Joint Robotics Laboratory)
Jim_E, thanks for the link to that Wired article (and I agree about print editions: Rolling Stone in the hand is very different from Rolling Stone on line, e.g.). But trying to control the incredibly complex movements of a hand and its fingers has got to be a few orders of magnitude more complicated than controlling legs enough to make them walk. So I'm not surprised there's been little progress in that area.
Chuck, I wish we had more info on the project's engineering details, which are still under development. Considering how much work has already been done aimed at similar goals, such as various methods of motion capture, I suspect it won't take all that long to write the algorithms. Battar, thanks for the response on this subject, too. FWIW, Fujitsu started working on turning the electrical impulses from a person's thoughts into electronically controlled actions back in the late 80s to early 90s.
Interesting link, Jim_E. Thanks for posting. I would think that the "bionic limb" idea would actually be easier since they are trying the use the biological processes already in place to do essentially what they were designed to do - think about moving your hand that used to be at the end of your arm and the new hand at the end of your arm moves as the original once did. The process of separate robots seems like a whole other ballgame.
Greg, the elderly could certainly benefit if they're among either target group, such as people confined to bed or wheelchairs. Since the technology is still being developed, most of the current learning curve is occurring among experimenters as they learn what thoughts produce what actions. Ideally, there won't be much for users.
The algorithms are far simpler than you think because you have a "man-in-the-loop" who can unconciously compensate for fairly large errors. For example, given 2 systems which react with a 30 degree difference in angular movement for the same input - well with one you'll just push a little harder until you get the desired result. You wouldn't even notice it. With fully automated autonomous systems, output must match input exactly or there will be trouble.
United Launch Alliance will fly 3D-printed flight hardeware parts on its rockets starting next year with the Atlas V. The company's Vulcan next-gen launch vehicle will have more than 100 production parts made with 3D printing. The main driver? Parts consolidation and 57% lower production costs.
The new small-form-factor EZ-BLE PRoC (Programmable Radio on Chip) module is a derivative of the existing PRoC BLE Programmable Radio-on-Chip solution. The EZ-BLE PRoC module integrates the programmability and ARM Cortex-M0 core of the PRoC BLE, two crystals, an onboard chip antenna, a metal shield, and passive components.
The engineers and inventors of the post WWII period turned their attention to advancements in electronics, communication, and entertainment. Breakthrough inventions range from LEGOs and computer gaming to the integrated circuit and Ethernet -- a range of advancements that have little in common except they changed our lives.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.