An extract of juice from the fruit of date palms like the ones shown here in Morocco could be used as the basis of a nontoxic anti-corrosive agent for aluminum alloys commonly used in aircraft structures. (Source: Wikimedia Commons/Erg Chebbi)
Dave, corrosion current density values (Icorr) appear several times in different contexts. Without an inhibitor it's 3.47, at 100 ppm it's 2.32, at 500 1.84, at 1500 1.25 and at 2000ppm it's 0.98. Regarding management not taking to the idea of using fruit juice, I think that has more to do with our Western culturally-induced industrial paradigms. People in other areas of the world, usually with a less complex economic infrastructure and greater reliance on local natural resources, take this research and its potential applications seriously. We have much to learn, or re-learn, it seems to me.
@Ann: If you have access to the article, can you tell us what the Icorr is, with and without the coating?
Icorr is the corrosion current (usually measured in mA/cm²), and is directly related to the corrosion rate. For example, if Icorr without the coating is 4 times more than Icorr with the coating, then the coating reduces the corrosion rate by a factor of 4.
In an article released earlier this year, Dr. Gerengi showed that the extract of a certain South American hardwood tree could reduce the corrosion rate of low carbon steel in hydrochloric acid by as much as factor of 3.
While this research into "green" corrosion inhibitors is interesting, the effects documented so far have been relatively modest. Many commercial corrosion inhibitors and coatings can reduce corrrosion rates by a factor of 10 or more.
Also, there are cultural issues that might hamper the adoption of such "green" corrosion inhibitors. If I suggested to management that we begin using fruit juice as a corrosion inhibitor for aluminum, I doubt it would be taken seriously.
Beth, it's not just a difference in porosity between tooth enamel and aluminum, it's the fact that they are entirely different physical and chemical structures. What happens between aluminum and the fruit juice extract is an electrostatic interaction, which is very different from what occurs between that extract and enamel.
Beth, that is an interesting development. Using non-toxic organics will probably result in production processes that are less toxic as well. Then the issue is can we grow enough of the organic compound to keep up. I doubt that is an issue with dates.
@ Ann: Do you have the name of the tree (common or scientific)? A friend just came back from Morocco and mentioned a tree that's being promoted heavily for export products. I'm curious to see if it's the same tree.
Given what sugars and fruit juice can do to the enamel on one's teeth, this result is a surprise to me. I suppose teeth are far more porous than aluminum, which could explain some of the differences. Nevertheless, using juice extracts as a way to prevent corrosion as opposed to toxic materials--you can't argue with that kind of green development.
What should be the perception of a product’s real-world performance with regard to the published spec sheet? While it is easy to assume that the product will operate according to spec, what variables should be considered, and is that a designer obligation or a customer responsibility? Or both?
Biomimicry has already found its way into the development of robots and new materials, with researchers studying animals and nature to come up with new innovations. Now thanks to researchers in Boston, biomimicry could even inform the future of electrical networks for next-generation displays.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.