Thanks, Jack. I'm not familiar with food processing--and each time I learn something about it, I must say the "Ecchh" factor tends to apply. In fact, I basically don't eat processed foods because of all the additives and excessive amounts of salt. Anyway, your description certainly fills out the picture of how harsh an environment processed food ingredients create in a plant.
Ann, don't forget about all the concentrates from juices to sauces to soda that might be fine when you consume them but are in a totally different state in the plant. There are also the unpronouncable ingredients that are in a small measure in the final product but great quantities there. Also, the main ingredient in just about everything seems to be salt. If it can take out an unprotected car over a winter, just imagine what it can do in quantities inside a moist food plant.
Thanks for the reply, TJ. I don't tend to think of foods as a harsh substance, more of a messy one, but you've certainly got a point. At least I can easily think of ketchup, mustard, and pickles, for example, which are all highly acidic.
TJ, the coatings I reported on are designed for use in harsh environments, such as aerospace and transportation, as well as bridges and other large structures exposed to weather, and some industrial environments. To my knowledge, none of these objects or their coatings are involved in, or designed for, direct food contact, and so AFAIK are not regulated by the FDA. However, I did not ask that question since it was not the focus of the article. Did you have something specific in mind?
TJ, I don't have any present plans to cover EPA approval or regulations of coatings in a major feature, but might report on this in a blog or news story if something newsworthy happens. What do you have in mind?
Thanks, TJ. You're right, stainless is well-known for being corrosion resistant. One thing I would have liked to explore was exactly what you point out--the fact that penetration and wear do occur. This was addressed to some extent by my sources, but monitoring processes and techniques are really a separate subject.
Your impression is VERY accurate. Stainless steel ISN'T. It's corrosion-resistant. Coatings can do better, but when put to use they must be monitored for wear. As soon as a penetration occurs, be it through wear or external damage, the part must be replaced or recoated.
Ann, will you be covering FDA approval of coatings in any of your reports?
Thanks for the feedback, guys. Chuck, I specifically looked at coatings that are targeted for harsh environments. And I didn't look for raw number volumes, just specific apps where these are used. Within those parameters, I got the impression that anti-corrosion is a big deal, maybe the biggest deal, for various reasons.
The engineers and inventors of the post WWII period turned their attention to advancements in electronics, communication, and entertainment. Breakthrough inventions range from LEGOs and computer gaming to the integrated circuit and Ethernet -- a range of advancements that have little in common except they changed our lives.
The age of touch could soon come to an end. From smartphones and smartwatches, to home devices, to in-car infotainment systems, touch is no longer the primary user interface. Technology market leaders are driving a migration from touch to voice as a user interface.
Soft starter technology has become a way to mitigate startup stressors by moderating a motor’s voltage supply during the machine start-up phase, slowly ramping it up and effectively adjusting the machine’s load behavior to protect mechanical components.
A new report from the National Institute of Standards and Technology (NIST) makes a start on developing control schemes, process measurements, and modeling and simulation methods for powder bed fusion additive manufacturing.
If you’re developing a product with lots of sensors and no access to the power grid, then you’ll want to take note of a Design News Continuing Education Center class, “Designing Low Power Systems Using Battery and Energy Harvesting Energy Sources."
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.