HOME  |  NEWS  |  BLOGS  |  MESSAGES  |  FEATURES  |  VIDEOS  |  WEBINARS  |  INDUSTRIES  |  FOCUS ON FUNDAMENTALS
  |  REGISTER  |  LOGIN  |  HELP
Feature
Electronics & Test
Golden Mousetrap Awards: The Winners!
2/13/2013

< Previous   Image 2 of 21      Next >

Electronics & Test:
Components, Hardware & Interconnects
Analog Devices
AD9670 Octal Ultrasound Receiver
On July 23, 2012, Analog Devices Inc. introduced the industry's first octal (eight-channel) ultrasound receiver with on-chip digital I/Q demodulation and decimation filtering. Because of the embedded demodulation and decimation feature, ADI's AD9670 is the first ultrasound receiver able to condition eight channels of data from RF to a baseband frequency, reducing the processing load on the system FPGA (field-programmable gate array) by at least 50 percent compared to other receivers. The AD9670 also integrates a low-noise amplifier, variable gain amplifier, anti-aliasing filter, and a 14-bit, A/D converter with the industry's highest sample rate (125 MSPS) and best SNR (signal-to-noise ratio) performance (75 dB) for enhanced ultrasound image quality. The new octal receiver is the latest addition to Analog Devices' award-winning ultrasound receiver portfolio and is designed for mid- to high-end portable and cart-based ultrasound systems. 

By introducing the first octal ultrasound receiver with digital demodulation and decimation filtering, Analog Devices is able to minimize the data I/O and throughput rates and place less stress on the system processor. At the same time, by extending the anti-aliasing filter frequency range and maintaining a high A/D converter sample rate, we are continuing to help medical and industrial ultrasound equipment manufacturers meet the trend toward higher frequency probes and superior image quality.

Electronics & Test:

Components, Hardware & Interconnects

Analog Devices

AD9670 Octal Ultrasound Receiver

On July 23, 2012, Analog Devices Inc. introduced the industry’s first octal (eight-channel) ultrasound receiver with on-chip digital I/Q demodulation and decimation filtering. Because of the embedded demodulation and decimation feature, ADI’s AD9670 is the first ultrasound receiver able to condition eight channels of data from RF to a baseband frequency, reducing the processing load on the system FPGA (field-programmable gate array) by at least 50 percent compared to other receivers. The AD9670 also integrates a low-noise amplifier, variable gain amplifier, anti-aliasing filter, and a 14-bit, A/D converter with the industry’s highest sample rate (125 MSPS) and best SNR (signal-to-noise ratio) performance (75 dB) for enhanced ultrasound image quality. The new octal receiver is the latest addition to Analog Devices’ award-winning ultrasound receiver portfolio and is designed for mid- to high-end portable and cart-based ultrasound systems.

By introducing the first octal ultrasound receiver with digital demodulation and decimation filtering, Analog Devices is able to minimize the data I/O and throughput rates and place less stress on the system processor. At the same time, by extending the anti-aliasing filter frequency range and maintaining a high A/D converter sample rate, we are continuing to help medical and industrial ultrasound equipment manufacturers meet the trend toward higher frequency probes and superior image quality.

< Previous   Image 2 of 21      Next >

Return to Article

View Comments: Newest First|Oldest First|Threaded View
<<  <  Page 2/2
apresher
User Rank
Blogger
Golden Mousetrap Awards
apresher   2/13/2013 8:38:03 AM
NO RATINGS
Congratulations to the Golden Mousetrap winners, and especially the group in Automation and Control. It's important to recognize design innovation and excellence, and the contributions that design engineers are making.

Elizabeth M
User Rank
Blogger
Well done!
Elizabeth M   2/13/2013 7:27:41 AM
NO RATINGS
Congratulations to all the well-deserving winners. It's fascinating to see the cool design work being accomplished now that will take us into the future.

<<  <  Page 2/2
Partner Zone
Latest Analysis
Taking energy from renewable sources, recycling existing energy, and using components that don’t need much energy at all are becoming critical industrial and consumer design criteria.
Sales of semiconductors, interconnects, and other electronic components in North America were flat through the second quarter of 2015, reflecting a pattern that’s been repeating itself for several years.
Texas Instruments has produced an e-book intended to get you up to snuff on the Industrial Internet of Things.
A South African startup is combining recycled plastic with solar power to give underprivileged schoolchildren a stylish schoolbag that also supplies them with light to study by.
An in-depth survey of 700 current and future users of 3D printing holds few surprises, but results emphasize some major trends already in progress. Two standouts are the big growth in end-use parts and metal additive manufacturing (AM) most respondents expect.
More:Blogs|News
Design News Webinar Series
8/13/2015 11:00 a.m. California / 2:00 p.m. New York
6/25/2015 11:00 a.m. California / 2:00 p.m. New York
6/24/2015 11:00 a.m. California / 2:00 p.m. New York
6/11/2015 11:00 a.m. California / 2:00 p.m. New York
Quick Poll
The Continuing Education Center offers engineers an entirely new way to get the education they need to formulate next-generation solutions.
Aug 31 - Sep4, Embedded System Design Techniques™ - Writing Portable and Robust Firmware in C
SEMESTERS: 1  |  2  |  3  |  4  |  5  |  6 |  7


Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.
Learn More   |   Login   |   Archived Classes
Twitter Feed
Design News Twitter Feed
Like Us on Facebook

Sponsored Content

Technology Marketplace

Copyright © 2015 UBM Canon, A UBM company, All rights reserved. Privacy Policy | Terms of Service