I see combatting the noisy industrial environment, wirelessly, is making some strides. I think I feel confident enough in the tech these days to use wireless in the machine shop. The little risk may have a huge payoff in mobility.
Thorough and well-written article. I completely agree with the speed of installation advantages of a wireless system. Many years ago, I had to set up a wired network to our factory floor and the time required to plan and install this older technology was significant (not to mention the time needed to troubleshoot improper hardware node connections). In many instances, wireless technology will prove to be faster and much more flexible than existing wired systems.
Conventional wisdom holds that MIT, Cal Tech, and Stanford are three of the country’s best undergraduate engineering schools. Unfortunately, when conventional wisdom visits the topic of best engineering schools, it too often leaves out some of the most distinguished programs that don’t happen to offer PhD-level degrees.
Airbus Defence and Space has 3D printed titanium brackets for communications satellites. The redesigned, one-piece 3D-printed brackets have better thermal resistance than conventionally manufactured parts, can be produced faster, cost 20% less, and save about 1 kg of weight per satellite.
A group of researchers at the Seoul National University have discovered a way to take material from cigarette butts and turn it into a carbon-based material that’s ideal for storing energy and creating a powerful supercapacitor.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.