EV races, for me, wouldn't cut it as a fan driven sport. Maybe when everybody, and I mean everybody, drives an electric car, and the speeds for racing were exceptional, would it be acceptable. For a lot of race fans, the sights, sounds, and smells of these 750+ HP machines are as much a part of the experience as the competition.
What you're seeing in the photo's is just the tip of the iceberg. Compared to the technology in Formula One, this is kindergarten stuff. Before it was outlawed, F1 had bidirectional telemetry - the car could be remotely modified by the engineers in the pits and, on occasion, from the factory. Also, since real computers are needed in the pits, you won't be seeing too many iPads and such - not enough power or screen real estate - F1 engineers monitor upwards of 100 data points during a race.
Without rules, more rules and more rules again, races would be won by the team with the most money. When you're dealing with the technological comlexity of an Indy car, only the wealthiest teams can compete and even then, the team with the most money usually has a significant edge. A team that can drive a million dollar race-car to destruction and have a ready spare is going to push harder than a single-car team. The most successful racing teams are the ones that can bend the rules without quite breaking them. Nice article and pic's.
all electric Indy racer? NOT IF THERE SMART naperlou I agree that IS THE PUBLIC PERCEPTION, but disagree that it is the PRO BUILDER, OWNER & DRIVER perception. I say this because the state of the art was DESIGNED, ENGINEERED, AND PAID FOR NOTBY INDYbut, all the others involved in RACE CARS WORLDWIDE.
Indy Motor Speedway over the last 2 decades has inflated costs on everything to the extent a LARGE part of the public can't aford to attend EVEN WITH THE TV & COMMERCIAL UNDER WRITING. And if you think I am kidding check out the cost of a summer nylon jacket in their Track Store next time you go there.
Names like OFFENHOUSER, CURTIS, CHEVY, FORD,HONDA, and the list goes on, longer than your memory will hold, left their MARK and BLOOD on tracks arround the world. As I see it the LAST PLACE EVs will be RACED, AFTER THEY are proven, is gasoline alley ...to mark thepassingof an era.... and CELEBRATE THE END OF FOSSIL FUEL.
As a lifetime fan of professional big-time car racing (and sports fan in general), I was interested to read the various comments by engineers concerning IndyCar racing. I've attended several IndyCar races, and many NASCAR races over the years.
First of all, professional auto racing is a sport, and all sports have rules. It's really all about the sports competition, not the equipment. Every team must follow the same rules. While it takes a great car to win a race, it also requires a great driver and team. People race cars because people have been racing...well since there's been people (but yes, the manufacturers like the marketing of thier products through racing).
Second, rules in racing is to contain costs and provide safety. With no rules, the cars would be much-much faster! I remember seeing speeds of 270 mph at Indianapolis many years ago, just way too fast! F1 mandated a chicane at Indy to keep the speeds down on the main oval for safety, too fast for the F1 cars and their tires. With no rules, there would be the tendency for one or several drivers/cars/teams that would dominate, those who spend the most money. It takes a great driver to beat the rest when the cars are evenly matched..."sporting event".
For those who desire an electric car Indy race, why not form your own professional race organization for electric race cars? The Indianapolis Motor Speedway may actually like having another feeder race before the actual Indy 500 (or Brickyard 400 for NASCAR). Who knows, maybe it would even be popular and attract attention, further progressing the sport (the way Indy racing started out).
I don't expect a Toyota Prius to perform in acceleration, handling and braking with my 1998 Chevy Camaro Z28, but I can't compete with the fuel efficiency of the Prius. ...but then, the Prius was not designed and engineered to be a competent 2-door sport coupe "performance" car.
The "INDY 500" is a great example of just how many rules can be applied to an activity. The opposite, which is more down to earth, and much farther away from NASA, is "World Of Outlaws" racing. Race cars costing hundreds of dollars instead of hundreds of thousands.
My impression, during the time I was able to look at one of those cars from a touchable distance, was that they are far closer to a military high performance aircraft than to a race car. Many of the components were the same, such as tubing and electrical connectors, and frame attachments. Of course, for driving at those speeds for extended periods of time, it probably is appropriate to use that variety of components.
Yes, Charles, that what I was thinking. It wouldn't work in a "real" Indy race for the rules reasons that you mentioned. It might however work as an exhibition. More likely, however, the technology leaders in electric automotive would probably need to do something like license the "Indy" name as a means of showing off their latest and greatest technologies. However, isn't that sort of how the racing circuits were originally established - to show off the high-end engine techs?
BMW has already incorporated more than 10,000 3D-printed parts in the Rolls-Royce Phantom and intends to expand the use of 3D printing in its cars even more in the future. Meanwhile, Daimler has started using additive manufacturing for producing spare parts in Mercedes-Benz Trucks.
Researchers have been developing a number of nano- and micro-scale technologies that can be used for implantable medical technology for the treatment of disease, diagnostics, prevention, and other health-related applications.
SABIC's lightweighting polycarbonate glazing materials have appeared for the first time in a production car: the rear quarter window of Toyota's special edition 86 GRMN sports car, where they're saving 50% of its weight compared to conventional glass.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies.
You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived.
So if you can't attend live, attend at your convenience.