Racing electric vehicles has been a constant evolution since their invention 100 years ago and solving challenges related to range, speed and quick battery swaps are all within reach towards creating a vehicle that can compete against a current Indy Car. However, if the race does not provide the visceral experience of hearing and feeling the noise of 20 highly tuned Indy Car engines hurtling down the front straight, there is little chance of atracting fans to the stands, to witness (read: fund) the event.
Beth, Data Acquisition has been around for decades on race cars. Telemetry is cheap enough today, that even lower classes of racing are using it. If you want to know more about these electronics, you can go to http://www.cosworth.com/Default.aspx?id=1094933 The data is used to make the car and driver faster. Think about shift points, braking points, slower drivers not using full throttle either due to poor car setup or lack of confidence in the car.
Electric Indy, I doubt that the fans will show up for a race where the cars are so quiet that you can't hear them. The sound of an electric motor whining around the track does not get the adrenaline going. Interesting - Yes, Exhilarating - No.
Ivan: Yes...Parnelli Jones' turbine car ran at Indy in 1968. The technology was quickly legislated out of future races. And you're right, Indy is all about rules, rules, rules, so an electric car would face a mountain of obstacles. I think you're onto something, though. What about an ALL-electric Indy race, where cars pull into the pits every 40 miles or so and use fast-battery-swap technology to install new sets of batteries? Sure, the cars would be slower than today's Indy cars, but maybe not as much slower as we might initially believe. Look this up: The White Lightning all-electric car actually ran at speeds of 240 mph. Maybe the race would have to be shortened, but it can be done. You may have launched a movement here, Ivan.
Anyone care to opine on just when and under what conditions we might find an all electric Indy race car? It might take some creative interpretations of the rules or some edits but I am willing to bet it will not be too long before an all electric car is entered.
I recall the turbine driven entry froma while back that almost won. That prompted some rule changes and I don't think we have seen one since.
It would definitely mark a turning point in the storied history of Indy racing!
It was surprising to see the BMW crew at the helm of so many real-time data feeds and screens. What exactly is the data being fed to the pit crew and any sense of how it's transmitted?
My guess is the next step in the techie transformation of the pit crew will be to replace those semi-dated looking screens with some fancy, touch screen tablets.
I'm now kicking myself for not bringing my Nikon SLR along for that leg of the trip! But the iPhone 4 does a creditable job capturing still and video.
Thanks for posting this. We got a chance to talk with Jay O'Connell, Bobby Rahal's chief engineer and he gave us a sense for the amazing communication that goes on in real time between the cars and the pit crew during the race (and which shows up graphically on their computing screens as what they call "marching ants" as the cars zoom around the track!).
Here's a link to our post about how O'Connell and team are so good at what they do, that race series organizers have put a governor on their cars!
Andrew Morris designed a circuit that could detect a stroke victim's groan and convert the sound into a signal so caregivers would know when help was needed.
New disc magnet motors fit into the design trend of stepping up to closed loop performance while maintaining the cost advantage of stepper motor technology.
At the Design News webinar on June 27, learn all about aluminum extrusion: designing the right shape so it costs the least, is simplest to manufacture, and best fits the application's structural requirements.
On April 21, NASA launched a novel project, putting into orbit three satellites that employ an off-the-shelf commercial smartphone as the control system.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 5
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
For industrial control applications, or even a simple assembly line, that machine can go almost 24/7 without a break. But what happens when the task is a little more complex? That’s where the “smart” machine would come in. The smart machine is one that has some simple (or complex in some cases) processing capability to be able to adapt to changing conditions. Such machines are suited for a host of applications, including automotive, aerospace, defense, medical, computers and electronics, telecommunications, consumer goods, and so on. This radio show will show what’s possible with smart machines, and what tradeoffs need to be made to implement such a solution.
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
0 
