The Sakura is "very compact, as it has to go down stairways just 70cm wide and turn around on landings that are also 70cm," Eiji Koyanagi fuRO's vice director, told DigiInfo TV at Japan Robot Week last month (watch the video below). "Coolant water is leaking from somewhere inside the reactor, because no matter how much water is pumped in, the level doesn't stay above 60cm. But unless that space can be filled with water, the melted-down fuel rods can't be removed safely, so Sakura's first job is to find out where the cracks are."
Its developers say the robot is especially adept at negotiating stairs and ramps, including changes in slope. "The part [of the buildings] above ground slopes at 40 degrees, and that below ground at 42 degrees," Koyanagi said. "This difference of just two degrees is very hard for a robot to handle. What's more, Sakura has to climb down and then climb up to the top of the suppression pool. That stairway slopes at 53 degrees."
He said fuRO expects to test the robot's mobility and durability in the next month or so. "Once that's done, we'll test its ability to carry the necessary equipment on a stairway. Then we plan to fine-tune Sakura by testing it with TEPCO."
Because of the increasing ubiquity of wearable technology, it would be easy to think that design of wearable devices is routine and involves common design and engineering knowledge. Missed efforts in development will be remembered once the devices are used in the field
This grab-bag of new fasteners and adhesives work with a range of materials they can attach to, as well as a wide variety of applications. Several are for use in consumer applications, such as wearables or other compact electronic assemblies, and some of the adhesives have extended service temperature ranges and cure at room temperature.
As governments, associations, and NGOs around the world seek to protect consumers, national and regional standards are becoming mandatory, challenging manufacturers and making testing and certification necessary for any product developed and brought to market.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.