Chuck, there seems to be an explosion of 3D for prototyping. I would think that low prodcution rate parts could be made with 3D printing as well. Of course, for high volume production, injection molding is much faster. And once the mold is made, it is relatively cheap.
One thing, though. You mention parts such as brake disks. Are these usable as real brakes, or are they just used to test fit and manufacturability.
Some of the most impressive gains are being made in 3D printing. I think this is the space to watch this year. This way of prototyping could revolutionize the auto industry and allow manufacturers to bang things out much more efficiently and cost effectively. Will be interesting to see how this evolves and is adopted by other automakers.
Elizabeth M, I agree. This year will be exciting to see all of the innovative products being created using 3D printers. Every Thursday, Adafruit posts blogs regarding the state of 3D printing. Here's the link.https://www.adafruit.com/blog/?s=3D+printing
Chuck, this is great news, although I'm not familiar with the term "surrogate" in 3D printing/AM. I have basically the same question as Lou: are the parts for form and fit only, or are they also functional? And another question: if some of them arfe functional, is this for prototyping or low-end production volumes? Including SLA says prototypes, but LS could be used for production parts.
These parts are truly functional, so they can be used in prototype testing applications. The main reason they don't make it to production is that these techniques wouldn't be practical for huge volumes. In production, automakers can build hundreds of parts per hour. So while it may take weeks to build the production tooling, they get that time back when the tooling is completed and they move to large-scale production. In contrast, the methods mentioned in this article can take hours per part, so while that works for small lots, it doesn't work for volumes in the tens of thousands. In that sense, building a car is a lot different than building a 787. Automotive production volumes are just too big for this technology.
mrdon, thanks for that link. In commenting on an earlier post last year, I expressed the idea that 3D printing could be used for scanning and reproducing museum replicas of various art objects, such as sculptures. Looks like that's being done by more than one artist. Good to see my wish come true.
Because of the increasing ubiquity of wearable technology, it would be easy to think that design of wearable devices is routine and involves common design and engineering knowledge. Missed efforts in development will be remembered once the devices are used in the field
This grab-bag of new fasteners and adhesives work with a range of materials they can attach to, as well as a wide variety of applications. Several are for use in consumer applications, such as wearables or other compact electronic assemblies, and some of the adhesives have extended service temperature ranges and cure at room temperature.
As governments, associations, and NGOs around the world seek to protect consumers, national and regional standards are becoming mandatory, challenging manufacturers and making testing and certification necessary for any product developed and brought to market.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.