Rockwell Offers Integrated Mid-Range EtherNet/IP Motion Control
The combined Kinetix 5500 servo drive, VP low-inertia servo motor, and single-cable technology from Rockwell Automation simplifies wiring for motion-control systems of midrange machines. The integrated product should reduce design time and lower the overall application footprint for equipment engineers and machine builders, the company said. (Source: Rockwell Automation)
Elizabeth, it seems that the trend is to increase integration of these types of devices. Many in the past were made up of separate components. The use of EtherNet/IP also eases integration and cuts costs. Interesting application.
Yes, it seems to be the case, you're right. Putting more functionality in one device reduces the need for multiple components, as you point out. And Ethernet/IP is becoming more prevalent in device design as it seems that everything is required to be connected to a network these days.
Obviously added EtherNet/IP to their mid-range motion control offering is the main story, but the single cable combining power and feedback might be the most unique benefit. Also covers both servos and induction motors with single platform.
The important part of single cable servo hardware is the cable. Rockwell will need to impress experienced engineers that they've designed the cable so that the feedback signals are immune to the noisy power signals.
Great point, TJ. Certainly engineered cables need to be designed carefully and tested extensively at longer distances. If it isn't right, I'm sure Rockwell will find out about it. But that's still a legitimate concern for system engineers.
The engineers and inventors of the post WWII period turned their attention to advancements in electronics, communication, and entertainment. Breakthrough inventions range from LEGOs and computer gaming to the integrated circuit and Ethernet -- a range of advancements that have little in common except they changed our lives.
The age of touch could soon come to an end. From smartphones and smartwatches, to home devices, to in-car infotainment systems, touch is no longer the primary user interface. Technology market leaders are driving a migration from touch to voice as a user interface.
Soft starter technology has become a way to mitigate startup stressors by moderating a motor’s voltage supply during the machine start-up phase, slowly ramping it up and effectively adjusting the machine’s load behavior to protect mechanical components.
A new report from the National Institute of Standards and Technology (NIST) makes a start on developing control schemes, process measurements, and modeling and simulation methods for powder bed fusion additive manufacturing.
If you’re developing a product with lots of sensors and no access to the power grid, then you’ll want to take note of a Design News Continuing Education Center class, “Designing Low Power Systems Using Battery and Energy Harvesting Energy Sources."
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.