naperlou, I agree. I recently read a paper regarding Germany's Research Center for Artificial Intelligence and the focus of their Smart Factory is to explore information and communication technologies. The tools of interest is smartphones and tablets and in the article it mentions using the ISO-OSI model. Although it wasn't discussed in the paper, the emphasis on the information and communications infrastructure for these mobile devices might be EtherCAT enabling the ISO-OSI model in their smart factory architecture.
Do you know of a way to attach to any of the industrial ethernet flavors without buying a 3rd party card (like the Hilscher card shown in the picture in this article)?
In theory, a "standard" ethernet port would suffice, but I don't know of any open source protocol stacks that implement the industrial ethernet protocols. It seems to be a cottage industry for people selling $500 to $700 PCI cards that implement the protocols.
If there is open source code available to allow communicating with Ethernet/IP or EtherCat, or any of the other industrial ethernet flavors, I would be interested in it.
I find it particularly frustrating that they sell Ethernet/IP as an "open" standard, yet you can't get the standard without paying for it, and/or becoming a member of the controlling organization. (OVDA)
I have used the Hilscher Cifx-50 series of cards for Ethernet/IP (and some other protocols). The slave card in low quantities is about $500, and the master is over $700. I'm pretty sure the physical port on the card is a standard Ethernet port. You are paying for the protocol stack.
Elizabeth, EtherCAT is a good technology adaptation. It uses the lower levels of the OSI protocol model for Ethernet. Thus, it can use common Ethernet hardware. This brings down the cost dramatically. The upper levels are very different from what you have in your PC, but these are under program control, so the hardware is not affected.
The Aerotech offering, by smoothly integrating with development environments such as Visual Studio provides an easy path to integration.
Advertised as the "Most Powerful Tablet Under $100," the Kindle Fire HD 6 was too tempting for the team at iFixit to pass up. Join us to find out if inexpensive means cheap, irreparable, or just down right economical. It's teardown time!
The first photos made with a 3D-printed telescope are here and they're not as fuzzy as you might expect. A team from the University of Sheffield beat NASA to the goal. The photos of the Moon were made with a reflecting telescope that cost the research team £100 to make (about $161 US).
The increased adoption of wireless technology for mission-critical applications has revved up the global market for dynamic electronic general purpose (GP) test equipment. As the link between cloud networks and devices -- smartphones, tablets, and notebooks -- results in more complex devices under test, the demand for radio frequency test equipment is starting to intensify.
Much of the research on lithium-ion batteries is focused on how to make the batteries charge more quickly and last longer than they currently do, work that would significantly improve the experience of mobile device users, as well EV and hybrid car drivers. Researchers in Singapore have come up with what seems like the best solution so far -- a battery that can recharge itself in mere minutes and has a potential lifespan of 20 years.
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.