Georgia Tech Ph.D. candidate Joshua Schultz makes some final adjustments to the camera positioning mechanism used in the muscle-like cellular actuators of the robot vision system.
I agree plasticmaster. Watching nature will likely provide much of the new developments in robotics. My dad, who worked in aerospace, said you can see the dynamics of flight just by putting your hand outside the window when you're in a fast-moving car. That says it all.
We've got to start somewhere. Using the building blocks we have currently at our disposal provide us with the information we need to proceed to the next logical step. We did it with airplanes (studying birds and bird flight). Vision, using amplified piezoelectric actuators is a fantastic step forward in developing the next stage of robotics whether microscopically or in a much larger sense.
Good points, Scott. A lot of the value would have to be in the processing of the collected data. The details you point out include processing that goes on in our brains.
This is an interesting development, though it's helpful to understand that vision encompasse more than eye movement. There is the ability to accommodate wide variations in ambient light, to change focus on-the-fly smoothly, and to use the internal image-processing "firmware" of the brain to re-map conflicting or confusing imagery into a rational construct. Eyes are pretty amazing organs that must balance the interplay of a lot of variables to create what we call vision.
Good point, Asupnekar. There seems to be a proclivity to mimicking human movement and capabilities with robots. Yet other natural occurrences -- like your vision example of a fish -- are likely to be superior to human capabilities.
Acctually, it depends on what you are doing. The greatest advancement of science, wealth and welfare in history has come since the digital revolution. If you want to get philosophical, the universe is inherently mathematical. By applying digital techniques we have made tremendous advances. Frankly, there are lots of things we want done that are better done by computers than by natural methods. Nature tends to be very inefficient, using more resources to do a task than is strictly necessary. Natural language, for example, is terriably inefficient as far as information content.
Even in the area of accumulating and using knowledge, we have advanced more in the digital age, which encompasses the last sixty years or so, than in all of previous human history. I don't see this as "unnatural". We got here by using our natural talents and intelligence, but there is something about thinking digitally and mathematically that has given our knowledge a whole new dimension.
I was actually thinking that there are a lot of weaknesses in trying to copy the motion the human eye. The two main things that popped into my mind was the relative lack of peripheral vision (compared with other animals) the the fact that it still needs to be mounted on a "neck" to see much of the field.
Yes, I am also fully agree with you both (Rob and Naperlou). In this case we can take the best example from nature i.e of a fish. If we consider the motion of fish eye its almost end to end from all directions and if this current invention matches with that then i feel that's the big acheivement.
By refining topologies and using new fluid technology, Moog's new peak sine drive controller increases available power without increasing controller volume.
Lantronix Inc. has expanded its line of controllers for sensor networks with the release of a rugged controller that improves management of automation systems used in a number of industries, including manufacturing, oil and gas, and chemicals.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
6 
