Shockwaves Caused Crash of DARPA Hypersonic Aircraft
4/26/2012
An artist's concept of the flight of DARPA's HTV-2, which crashed into the Pacific last August after greater than expected shockwaves peeled off parts of its thermal shell. (Source: DARPA)
The test duration reminds me of oner of the large rocket motor manufacturers comments after the exit nozzle exited 50 milliseconds into the test, "all test objectives were met"
All they need to do is get some materials from one of those UFO's at Area 51 - problem solved! :)
I guess the point is that you'll never know if you don't try. I'm sure they learned a lot about shockwaves that will probably be useful in other applications, including slower speed craft.
It seems to me that ceramics is the answer here - our current technology can handle 2k-3k degree temperatures. I'm not sure how they would hold up to shockwaves since they can be brittle, but at that speed and temperature they may actually be a bit more flexible.
Flying fast within the atmosphere has its applications - there will be times that going out of the atmosphere simply isn't practical - short range applications, for example. I cannot imagine the sonic properties of something travelling Mach 20, it would certainly not be a stealth vehicle; but when you're going that fast you don't need to be stealth.
Avoiding missles, etc doesn't count if it can't get there and burns up on the way. Far better is skipping off the atmosphere or full space flight, both are far easier to do, have far more range, payload. And they are far safer from countermeasures.
There is not much that can withstand 5000F or so the ship has to endure. If you make it bigger for payload, the drag, heat just increases.
I'm having a hard problem find metals, etc that can withstand just 1500F with a decent lifetime which hasn't been easy. Much less the temps a hypersonic craft has to endure.
Over 2500mph just isn't smart in the atmosphere and this, every test before proves this. No?
So please tell me how far can they go and how much payload can they carry? Enquiring minds want to know?
ervin, thanks for the explanation. I'm surprised that we're still infants in this field after so many decades of aviation history. That's unnerving, especially considering this is a DARPA project.
This is a DARPA project. Being able to fly that fast in the atmosphere means that it can outrun anything shot at it (SAM, bullets, etc.) - so that it could get somewhere fast and drop a payload (bombs, etc.). It could also be used to catch anything in the air (planes, missiles, etc.). It would also be extremely difficult to track or anticipate. Even a laser would have a hard time hitting it, especially if it is making random micro adjustments to its flight path. LA to NY in 12 minutes means that it could get to North Korea in under 30 minutes.
Chuck, I was also guessing that the 100x shockwaves might be an anomaly. I just assumed that we knew a lot more about their potential force after all this time, and could therefore compute the relevant loads.
In the early days of SPICE (circuit simulator), the late Bob Pease had a rant in his weekly column. He published a circuit to simulate in SPICE and pointed out a certain resistor dissipated negative power! He said he couldn't wait to put together the real circuit and watch it get colder by the minute. He speculated on the breakthroughs it would bring to food and beer storage.
Then he got serious and made the point: simulations are a good tool but no substitute for hands-on prototypes. Of course simulation software has made huge advances in all disciplines but Pease's point still rings true today.
I absolutely agree...this was a fantastic accomplishment. After all, the whole point of testing something is to determine potential failure modes. Simulations give us a fantastic set of tools to better predict failure, but there is really no subtitute for an actual real world test. So often, we discover important variables or interactions that were not anticipated by simulation.
By refining topologies and using new fluid technology, Moog's new peak sine drive controller increases available power without increasing controller volume.
Lantronix Inc. has expanded its line of controllers for sensor networks with the release of a rugged controller that improves management of automation systems used in a number of industries, including manufacturing, oil and gas, and chemicals.
Inspired by the hooks a parasitic worm uses to penetrate its host's intestines, the Karp Lab has invented a flexible adhesive patch covered with microneedles that adheres well to wet, soft tissues, but doesn't cause damage when removed.
From Dell / Intel® New Paradigms in Design Work Scott Hamilton, vertical market strategist for Dell Precision workstations, 5/2/2013 3
Early in my career, I worked as a draftsman and remember the days of drawing on vellum with numbered pencils and Mylar with plastic lead. This was a fun experience in the sense that I ...
I've been using workstations for more than 10 years and love finding ways to get more performance from my system. With demanding professional applications that require more power each ...
A lasting memory from my first job as an engineer in an auto assembly plant is standing on hard concrete at six in the morning, vending-machine coffee clutched in hand, listening to ...
A quick look into the merger of two powerhouse 3D printing OEMs and the new leader in rapid prototyping solutions, Stratasys. The industrial revolution is now led by 3D printing and engineers are given the opportunity to fully maximize their design capabilities, reduce their time-to-market and functionally test prototypes cheaper, faster and easier. Bruce Bradshaw, Director of Marketing in North America, will explore the large product offering and variety of materials that will help CAD designers articulate their product design with actual, physical prototypes. This broadcast will dive deep into technical information including application specific stories from real world customers and their experiences with 3D printing. 3D Printing is
To save this item to your list of favorite Design News content so you can find it later in your Profile page, click the "Save It" button next to the item.
If you found this interesting or useful, please use the links to the services below to share it with other readers. You will need a free account with each service to share an item via that service.
Tweet This
6 
