Plant updates can be tested before operators throw the switch on the control system. The use of simulation will likely expand considerably in 2012. Simulation is being used in new plant development, plant updates, and in configuring the plant for new products or for greater optimization.
The advantage is the ability to test the system before it is deployed. The result is a significant reduction in set-up costs -- both labor and time –- and greater optimization. Plant operators report that the reduction in set-up costs alone covers the cost of using simulation. This photo shows an example of simulation used to configure robots.
(Source: Simx Simulation.)
The move online has been a long and sometimes tortured road for many publishing companies and publications, both in and out of tech. Writing for the web has been one challenge, but I think one that's been at least as tough is figuring out how to shift the print ad revenue model to online revenue sources. I know there was a lot of discussion about that in the early days.
Yes, things have changed dramatically in the last decade, especially in the last five years. The dot com pioneers were correct that they were changing the world. Many of them, however, got crushed in the process.
For technology journalists, opportunities have proliferated for those who moved online. Design News is a good example of journalism moving online. The print journalists -- especially those at newspapers -- either learned to write for the web or moved to a new profession.
Even though tech writers, non-journalists, took the biggest hit at that time, all technology writers suffered including journalists, as you apparently did, too. That's the last time I ever did any documentation-type tech writing. The industry basically morphed and shifted to people who know a lot of programming, as everything went online. Yes, it's a very different world with entirely different terms and even a different dialect, you might say.
Yes, I actually use the same terms. There was something about the context of one of your messages that made it seem you meant technology journalists when you said tech writers. I'm right next two a national lab here in Albuquerque, so we have an army of tech writers working for Sandia Labs or its suppliers and partners. Plus there's a bunch just north of here at Los Alamos Labs. I find that tech writing is a different discipline altogether from journalism, barely sharing the same language.
The terms can be very con fusing. That term, tech writers, has always thrown people outside the industry. The term, and the phenomenon, were apparently confined primarily to Silicon Valley. I usually use "technology writers" to mean the larger group of people who write about technology, whether its journalism, PR/marcom writing or tech docs. Many of us have done some of each during our checkered careers, and in SV, one's career is likely to have been highly checkered.
OK, I get it, Ann. I thought you meant journalists when you used tech writers. I remember there was tons of work in tech writing for documentation. Most of those I knew -- as you pointed out -- were from a liberal arts background. I did a bit of that in the early 80s for a company that transferred library records on online format for systems like Dialog, LexisNexis and McGraw Hill -- way before the WWW became public (thanks Al Gore).
The tech writers I meant were the documentation people, not technology writers who are journalists or marcom writers. It was a huge Silicon Valley industry that began in the late 70s/early 80s, and consisted primarily of liberal arts majors who weren't being hired elsewhere, although there were also some wannabe engineers, and some were housewives (back when those existed in large numbers). Some of us started in the marcom end, some went right into documentation, a few had already been programmers. It was all print back then, so you had to be good at a lot of things besides writing. BTW, the same basic populations had earlier been recruited to become programmers and computer salespeople in the late 60s/early 70s. All of these industries were 99% contractors. And documentation, in particular, could also be done at home.
Nice piece of history. Thanks. You probably also remember the army of new tech writers that was assembled when the dot com boom soared in 1999. I remember they were called the 99ers. They came mostly from the newspaper world and many were fresh out of J school. They all lost their jobs in 2000. Me included. I was with E-Commerce Business (once a sister pub to Design News).
Right after tech writers were told to become accountants and real estate agents, engineers were told to become accountants and real estate agents. A year or so later, engineers were becoming tech writers, as the job descriptions for writers had "suddenly" changed. This was in Silicon Valley, and I don't know to what extent this all happened elsewhere. I would not have believed this if I hadn't seen it myself. And it was clearly a humiliating experience, so they may not have talked about it much. Also, that was pre-Internet days.
These engineers, BTW, were all senior engineers, which fact did not escape their notice. This was the last phase of downsizing in SV (and elsewhere), which flushed out many, many middle managers with experience (and higher salaries and retirement incomes/pensions which then disappeared), and then the specialists, such as engineers and marketing people, with experience (and...). And while some of those engineers were replaced by younger ones from other countries here, many were replaced by younger foreign ones in Asia. At one point, the buzz in SV was that only software engineering remained in the US. Many younger people, at least out here, were discouraged from going into EE or computer science because of this. The so-called "shortage" is a more recent phenomenon. We had some dialog about this in another comment's thread. To this day I don't believe there was a shortage then.
I hadn't heard that about herding engineers into other careers, Ann. Wow. I always thought there was a shortage of engineers in the United States.
I know a good portion of production engineering has shifted to Asia to follow the manufacturing, but I was under the impression that design engineering had remained in North America and Europe (with a few exceptions such as cell phones and laptops). I've heard that companies don't want their design engineering in Asia because of potential IP theft.
The engineers and inventors of the post WWII period turned their attention to advancements in electronics, communication, and entertainment. Breakthrough inventions range from LEGOs and computer gaming to the integrated circuit and Ethernet -- a range of advancements that have little in common except they changed our lives.
The age of touch could soon come to an end. From smartphones and smartwatches, to home devices, to in-car infotainment systems, touch is no longer the primary user interface. Technology market leaders are driving a migration from touch to voice as a user interface.
Soft starter technology has become a way to mitigate startup stressors by moderating a motor’s voltage supply during the machine start-up phase, slowly ramping it up and effectively adjusting the machine’s load behavior to protect mechanical components.
A new report from the National Institute of Standards and Technology (NIST) makes a start on developing control schemes, process measurements, and modeling and simulation methods for powder bed fusion additive manufacturing.
If you’re developing a product with lots of sensors and no access to the power grid, then you’ll want to take note of a Design News Continuing Education Center class, “Designing Low Power Systems Using Battery and Energy Harvesting Energy Sources."
Focus on Fundamentals consists of 45-minute on-line classes that cover a host of technologies. You learn without leaving the comfort of your desk. All classes are taught by subject-matter experts and all are archived. So if you can't attend live, attend at your convenience.